Manual Generator Controller Module: EGC-250
رقم القطعة: CS-MANUAL-GENERATOR-CONTROLLER-MODULE-EGC-250
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
Manual Generator Controller Module: EGC-250
المواصفات
| Feature 1 | Display of 3 Phase Generator Parameters: Voltage, Frequency, Speed, Run Hours |
|---|---|
| Feature 2 | Measurement and display of Load current and Instantaneous load in kW |
| Feature 3 | Metering Energy for DG. |
| Feature 4 | Wide range of Programmable Parameters, including settings of voltage, frequency & different delay times |
| Feature 5 | Wide range of Analogue Sensor Selection |
| Feature 6 | Programmable DI/DOs |
| Feature 7 | Fixed the combined input-output charge alternator port with short circuit protection |
| Feature 8 | Fault records & Event records with a date and time stamp |
| Source URL | https://cselectric.co.in/products-solutions/protectionandmeasurementdevices/lv-protection-solution/manual-generator-controller-module-egc-250/ |
| C&S Taxonomy Path | products-solutions > protectionandmeasurementdevices > lv-protection-solution > manual-generator-controller-module-egc-250 |
| C&S Category | protectionandmeasurementdevices |
| Datasheet URL | https://cselectric.co.in/wp-content/uploads/2025/11/EGA-250-Catalog.pdf |
| Presentation | EGC-250 is a MANUAL Generator controller module including protection for a standby power supply (Generator/DG Set). It uses a single advanced microcontroller chip for easy and trouble-free DG control. It is cost cost-effective solution for DG operation. The user can start the DG manually or automatically using remote mode operation. The user can control the DG or the Mains breaker using the front keys or DI. In any faulty condition, it raises an alarm. All alarms occurring at abnormal DG conditions are detected and displayed on the LCD, and if necessary, DG is stopped and the hooter gets activated. |
| Benefits | The module ensures full safety for the generator set with built-in functions for critical conditions It measures and displays crucial parameters for both the generator and the mains supply The controller records faults and events with date and time stamps The EGC-250 features a wide range of programmable parameters, including settings for voltage, frequency, and various time delays Equipped with an alphanumeric LCD and keypad, the module is designed for ease of operation and clear annunciation of status and alarms. The Relay supports both manual operation via front panel push buttons and remote operation |
| Download Brochure | Download Brochure <!-- |
| Feature 9 | Logical interlock for Mains & DG breaker for fail-safe operation |
| Feature 10 | Wide array of time circuits for start delay, stop delay, re-cooling etc |
| Feature 11 | Full engine safety functions: The unit has Low Lube Oil Pressure (LLOP), Hi Coolant Temperature (HCT), Over speed, Start Failure, Stop Failure, Fuel level trip, Emergency stop and Overload trip functions |
| Feature 12 | Presentation |
| Feature 13 | Benefits |
| Feature 14 | Contact Our Experts |
| Feature 15 | Download Brochure |
| Feature 16 | The module ensures full safety for the generator set with built-in functions for critical conditions |
| Feature 17 | It measures and displays crucial parameters for both the generator and the mains supply |
| Feature 18 | The controller records faults and events with date and time stamps |
| Feature 19 | The EGC-250 features a wide range of programmable parameters, including settings for voltage, frequency, and various time delays |
| Feature 20 | Equipped with an alphanumeric LCD and keypad, the module is designed for ease of operation and clear annunciation of status and alarms. |
| Feature 21 | The Relay supports both manual operation via front panel push buttons and remote operation |
| Summary | Optimize DG performance with the EGC-250 Manual Generator Controller by C&S Electric. Ensure safe, reliable, and efficient generator control. Explore features or request a quote today. |
| C&S Subcategory | lv-protection-solution |
| Manual Generator Controller Module: EGC-250 | FEATURES Display of 3 Phase Generator Parameters: Voltage, Frequency, Speed, Run Hours Measurement and display of Load current and Instantaneous load in kW Metering Energy for DG. Wide range of Programmable Parameters, including settings of voltage, frequency & different delay times Wide range of Analogue Sensor Selection Programmable DI/DOs Fixed the combined input-output charge alternator port with short circuit protection Fault records & Event records with a date and time stamp Logical interlock for Mains & DG breaker for fail-safe operation Wide array of time circuits for start delay, stop delay, re-cooling etc Full engine safety functions: The unit has Low Lube Oil Pressure (LLOP), Hi Coolant Temperature (HCT), Over speed, Start Failure, Stop Failure, Fuel level trip, Emergency stop and Overload trip functions Presentation Benefits Contact Our Experts Download Brochure EGC-250 is a MANUAL Generator controller module including protection for a standby power supply (Generator/DG Set). It uses a single advanced microcontroller chip for easy and trouble-free DG control. It is cost cost-effective solution for DG operation. The user can start the DG manually or automatically using remote mode operation. The user can control the DG or the Mains breaker using the front keys or DI. In any faulty condition, it raises an alarm. All alarms occurring at abnormal DG conditions are detected and displayed on the LCD, and if necessary, DG is stopped and the hooter gets activated. The module ensures full safety for the generator set with built-in functions for critical conditions It measures and displays crucial parameters for both the generator and the mains supply The controller records faults and events with date and time stamps The EGC-250 features a wide range of programmable parameters, including settings for voltage, frequency, and various time delays Equipped with an alphanumeric LCD and keypad, the module is designed for ease of operation and clear annunciation of status and alarms. The Relay supports both manual operation via front panel push buttons and remote operation <input size="40" maxlength="400" class="wpcf7-form-control wpcf7-email wpcf7-validates-as-required wpcf7-text wpcf7-validates-as-email Your Email" id="YourEmail" aria-required="true" aria-invalid=" |