Voltage Detecting & Indicating System : VDIS-G
رقم القطعة: CS-VOLTAGE-DETECTING-INDICATING-SYSTEM-VDIS-G
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
Voltage Detecting & Indicating System : VDIS-G
المواصفات
| Feature 1 | Relay gets energised either from Current, Aux. voltage, front USB or internal battery (whichever is available) |
|---|---|
| Feature 2 | VDIS is a voltage presence indicating system conform to IEC62271-213:2021 standard |
| Feature 3 | Optical blinking led for voltage indication & Output terminals for LRM block |
| Feature 4 | Nominal frequency: 50 / 60 Hz |
| Feature 5 | Suitable for front panel mounting |
| Feature 6 | Suitable for Indoor & Outdoor applications |
| Feature 7 | Suitable for various voltage ranges: 3.3 – 24 kV |
| Feature 8 | Bushing capacitance range: 15 – 66 pF based on model/customer requirement |
| Source URL | https://cselectric.co.in/products-solutions/protectionandmeasurementdevices/self-powered-relays-rmu/voltage-detecting-indicating-system-vdis-g/ |
| C&S Taxonomy Path | products-solutions > protectionandmeasurementdevices > self-powered-relays-rmu > voltage-detecting-indicating-system-vdis-g |
| C&S Category | protectionandmeasurementdevices |
| Datasheet URL | https://cselectric.co.in/wp-content/uploads/2026/04/VDIS-G_3.pdf |
| Benefits | The C&S VDIS-G (Voltage Detecting & Indicating System) relays offer key benefits focused on enhanced safety, operational efficiency, and system longevity in medium-voltage electrical systems. Provides a reliable and clear indication of the presence or absence of operating voltage, which helps prevent electric shocks or electrocution during maintenance or operation. The system is designed to meet stringent safety regulations and standards, such as IEC 62271-213, ensuring regulatory compliance and safe operation. The voltage detection and indication functions typically do not require an external power supply or internal battery, resulting in a maintenance-free device. Built-in test points are available to verify the functionality and accuracy of the system and its display without needing auxiliary power, simplifying testing procedures. |
| Download Brochure | Download Brochure <!-- |
| Feature 9 | Internal gas tube arresters as required by the standard for SURGE protection |
| Feature 10 | Indication Appear: When the voltage is in the range of 45% to 120% of the nominal voltage |
| Feature 11 | Indication doesn’t appear: When the voltage is less than 10% of the nominal voltage |
| Feature 12 | SCADA compatibility, for SCADA signalling, NO/NC contact available for RTU. |
| Feature 13 | Introduction |
| Feature 14 | Benefits |
| Feature 15 | Contact Our Experts |
| Feature 16 | Download Brochure |
| Feature 17 | Provides a reliable and clear indication of the presence or absence of operating voltage, which helps prevent electric shocks or electrocution during maintenance or operation. |
| Feature 18 | The system is designed to meet stringent safety regulations and standards, such as IEC 62271-213, ensuring regulatory compliance and safe operation. |
| Feature 19 | The voltage detection and indication functions typically do not require an external power supply or internal battery, resulting in a maintenance-free device. |
| Feature 20 | Built-in test points are available to verify the functionality and accuracy of the system and its display without needing auxiliary power, simplifying testing procedures. |
| Summary | VDIS-G voltage detecting system for RMU and MV networks with IEC 62271-213 compliance, LED indication, SCADA support and surge protection. View specs and request a quote. |
| C&S Subcategory | self-powered-relays-rmu |
| Introduction | The VDIS is a voltage presence indicating system, in compliance with the IEC 62271-213:2021 standard, which is used in RMU/MV Network. This is basically a tool that verifies the absence or presence of voltage in the network & helps to suggest when there is a need for maintenance & repairs. This device is an essential piece of equipment for most modern networks. Indication of the voltage is displayed by high-brightness LEDs. It gets fit with the bushing capacitance as input to measure the incoming voltage. |
| Voltage Detecting & Indicating System : VDIS-G | FEATURES Relay gets energised either from Current, Aux. voltage, front USB or internal battery (whichever is available) VDIS is a voltage presence indicating system conform to IEC62271-213:2021 standard Optical blinking led for voltage indication & Output terminals for LRM block Nominal frequency: 50 / 60 Hz Suitable for front panel mounting Suitable for Indoor & Outdoor applications Suitable for various voltage ranges: 3.3 – 24 kV Bushing capacitance range: 15 – 66 pF based on model/customer requirement Internal gas tube arresters as required by the standard for SURGE protection Indication Appear: When the voltage is in the range of 45% to 120% of the nominal voltage Indication doesn’t appear: When the voltage is less than 10% of the nominal voltage SCADA compatibility, for SCADA signalling, NO/NC contact available for RTU. Introduction Benefits Contact Our Experts Download Brochure The VDIS is a voltage presence indicating system, in compliance with the IEC 62271-213:2021 standard, which is used in RMU/MV Network. This is basically a tool that verifies the absence or presence of voltage in the network & helps to suggest when there is a need for maintenance & repairs. This device is an essential piece of equipment for most modern networks. Indication of the voltage is displayed by high-brightness LEDs. It gets fit with the bushing capacitance as input to measure the incoming voltage. The C&S VDIS-G (Voltage Detecting & Indicating System) relays offer key benefits focused on enhanced safety, operational efficiency, and system longevity in medium-voltage electrical systems. Provides a reliable and clear indication of the presence or absence of operating voltage, which helps prevent electric shocks or electrocution during maintenance or operation. The system is designed to meet stringent safety regulations and standards, such as IEC 62271-213, ensuring regulatory compliance and safe operation. The voltage detection and indication functions typically do not require an external power supply or internal battery, resulting in a maintenance-free device. Built-in test points are available to verify the functionality and accuracy of the system and its display without needing auxiliary power, simplifying testing procedures. <span class="wpcf7-form-control- |