BTicino

pushbutton dimmer output 0 - 10 V for ballast - 2 modules - dark

رقم القطعة: BT-YD4410

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

pushbutton dimmer output 0 - 10 V for ballast - 2 modules - dark

المواصفات

Built-in depth34 mm
Mounting methodFlush-mounted
ColourBlack
degree of impact strength (IK)IK04
Operating / setting temperature (Min-Max)-5-35 °C
Storage temperature (Min-Max)-10-70 °C
Voltage typeAC
Nominal voltage (Min-Max)110-240 V
Frequency (Min-Max)50-60 Hz
Halogen freeYes
Cable nature for connectionFlexible or rigid
Cable section (Min-Max)1.5-2.5 mm²
Source URLhttps://www.bticino.com/products/bt-yd4410
Part NumberYD4410
BTicino CategoryDimmers
BTicino Taxonomy PathSwitches, sockets and wiring devices > Light Now premium range > Dimmers
BTicino SeriesLight NOW
ObsoleteNo
NewNo
Datasheet URLhttps://assets.legrand.com/pim/NP-FT-GT/IDP001861_01-EN.pdf
Antimicrobial treatmentNo
MaterialPlastic
Material qualityThermoplastic
Surface protectionLacquered
Number of units1
Surface finishingMatt
TransparentYes
Type of fasteningClick in mounting
Terminal marking indicationNo
Connection typeScrewed terminal
Terminals capacity (Min-Max)1.5-2.5 mm²
RAL-number (similar)9011
Assembly arrangementBasic element with central cover plate
Number of modules (module system)2
Suitable for degree of protection (IP)IP20
Device width45 mm
Device height45 mm
Device depth42 mm
Min. depth of built-in installation box44 mm
Compatible with Apple HomeKitNo
Compatible with Google AssistantNo
Compatible with Amazon AlexaNo
IFTTT support availableNo
Type of loadElectronic ballast 1-10 V
Mandatory neutralYes
Stress test conformity (1000V)No
Substation inputNo
Light value memoryNo
Applicable with buttonYes
Applicable with movement sensorNo
Applicable with presence indicatorNo
Applicable with time switch/timerNo
Applicable with transmission buttonNo
Applicable with infrared buttonNo
App control via BluetoothNo
Serial dimmerYes
Dimming phase cut-on (leading edge)No
Dimming phase cut-off (trailing edge)No
Min. brightness controllableYes
Control voltage (Min-Max)0-10 V