982 XE Wheel Loader

Caterpillar

982 XE Wheel Loader

رقم القطعة: CAT-130322

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

982 XE Wheel Loader

المواصفات

Engine ModelCat® C13
Displacement12.5 l
Note (1)The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to: 20% biodiesel FAME (fatty acid methyl ester) ***100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details. *While Caterpillar engines are compatible with these alternative fuels, some regions may not allow their use. **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ***Engines with no aftertreatment devices are compatible with higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
Note (3)Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
Forward - 16.2 km/h
Forward - 211.8 km/h
Forward - 320.9 km/h
Forward - 439.5 km/h
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.600 kg (3.5 lb) of refrigerant, which has a CO2 equivalent of 2.288 metric tonnes (2.522 tons). - If equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.389 kg (3.1 lb) of refrigerant, which has a CO2 equivalent of .001 metric tonnes (1.10 tons).
NoteWeight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m³ (8 yd³) general purpose bucket with BOCE.
Reverse - 17.1 km/h
Fuel Tank426 l
Cooling System52 l
Reverse - 213.5 km/h
DEF Tank21 l
Transmission77 l
Model982 XE
Product Pagehttps://www.cat.com/en_US/products/new/equipment/wheel-loaders/medium-wheel-loaders/130322.html
Caterpillar CategoryMedium Wheel Loaders
Caterpillar Category PathProducts > Equipment > Wheel Loaders > Medium Wheel Loaders > 982 XE
Caterpillar Product Familyequipment
Caterpillar Product Page ID130322
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20251204-fed26-11e95
EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Operating Weight35510 kg
Breakout Force262 kN
Transmission — NoteMaximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Hydraulic Tank153 l
Ground Clearance428 mm
Biodiesel CapabilityUp to B20¹
Wheel Base3800 mm
Operating Specifications — Note (2)Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Crankcase37 l
Height - Top of ROPS3801 mm
Operating Specifications — Note (1)For a machine configuration as defined under “Weight.”
Reverse - 328 km/h
Hinge Pin Height at Maximum Lift4741 mm
Operator Sound Pressure Level - ISO 6396:200870 dB(A)
Sound — Note (1)¹Including countries that adopt the EU and UK Directives.
Exterior Sound Power Level - ISO 6395:2008107 dB(A)
Differential - Final Drives - Rear92 l
Operator Sound Pressure Level - ISO 6396:2008 ¹70 dB(A)
Differential - Final Drives - Front92 l
Sound — Note (2)²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
Static Tipping Load - Full 40° Turn - With Tire Deflection21110 kg
Static Tipping Load - Full 40° Turn - No Tire Deflection22418 kg
Implement System - Maximum Operating Pressure34300 kPa
Hydraulic Cycle Time - Total10.1 s
Height - Top of Hood3036 mm
Engine Power @ 1,700 rpm – ISO 14396:2002322 kW
Overall Length - Without Bucket8597 mm
Hinge Pin Height at Carry Height791 mm
Gross Power @ 1,700 rpm – SAE J1995:2014325 kW
Lift Arm Clearance at Maximum Lift3902 mm
Rack Back - Maximum Lift57 °
Gross Torque @ 1,200 rpm – SAE J1995:20142218 N·m
Rack Back - Carry Height48 °
Width over Tires (Loaded)3471 mm
Tread Width2540 mm
Dimensions - Standard Lift — NoteAll dimensions are approximate and based on machine equipped with 6.1 m³ (8 yd³) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
Dimensions - High Lift — Overall Length - Without Bucket9104 mm
Dimensions - High Lift — Hinge Pin Height at Carry Height896 mm
Dimensions - High Lift — Hinge Pin Height at Maximum Lift5150 mm
Dimensions - High Lift — Lift Arm Clearance at Maximum Lift4069 mm
Dimensions - High Lift — Rack Back - Maximum Lift56 °
Dimensions - High Lift — NoteAll dimensions are approximate and based on machine equipped with 6.1 m³ (8 yd³) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
Dimensions - High Lift — Rack Back - Carry Height49 °
Engine Torque - 1,200 rpm ISO 14396:20022197 N·m
Gross Torque - 1,200 rpm SAE J1995:20142218 hp
Engine Torque @ 1,200 rpm – ISO 14396:20022197 N·m
Engine — Displacement12.5L
Engine Power - 1,700 rpm ISO 14396:2002322 kW
Engine — Engine Power - 1,700 rpm ISO 14396:2002438 hp (metric)
Gross Power - 1,700 rpm SAE J1995:2014325 kW
Engine — Gross Power - 1,700 rpm SAE J1995:2014442 hp (metric)
Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011301 kW
Engine — Net Power - 1,700 rpm ISO 9249:2007, SAE J1349:2011409 hp (metric)
Net Torque - 1,100 rpm ISO 9249:2007, SAE J1349:20112054 N·m
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:20112054 N·m
Engine Power - 1,700 rpm ISO 14396:2002 (2)438 hp (metric)

منتجات مشابهة

معدات ثقيلة وآليات