GD555-5
رقم القطعة: KOMATSU-GD555-5
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
آلات تمهيد الطرق (الجريدر) GD555-5
المواصفات
| Maximum torque (N-m) | 880 |
|---|---|
| Maximum torque (ft-lbs) | 648.1 |
| Operating weight (kg) | 18120 |
| Operating weight (lbs) | 39954 |
| Engine model | SAA6D107E-1 |
| Aspiration | Turbocharged and air to air aftercooled |
| Piston displacement (L) | 6.69 |
| Final drive (US gal) | 4.49 |
| Final drive (L) | 17 |
| Bore (mm) | 107 |
| Bore (in) | 4.21 |
| Stroke (in) | 4.88 |
| Stroke (mm) | 124 |
| Hydraulic system (US gal) | 18.23 |
| Hydraulic system (L) | 69 |
| Engine power (HP) | 193 |
| Engine power (kW) | 144 |
| Piston displacement (in³) | 408.24 |
| Engine type | Water-cooled, 4-cycle, direct injection |
| Cooling system (L) | 30 |
| Tires | 17.5 x 25, 14.00 - 24 radial |
| Dimensions (in) | 170.08 x 25.39 x 0.98 |
| Dimensions (mm) | 4320 x 645 x 25 |
| Cooling system (US gal) | 7.93 |
| Maximum lift above ground (ft) | 1.57 |
| Maximum lift above ground (mm) | 480 |
| Maximum cutting depth (mm) | 615 |
| Maximum cutting depth (ft) | 2.02 |
| Maximum blade angle, right or left (degrees) | 90 |
| Blade tip angle forward (degrees) | 40 |
| Blade tip angle reverse (degrees) | 5 |
| Blade range: right (moldboard)(ft) | 2.7 |
| Blade range: right (moldboard)(mm) | 820 |
| Blade range: left (moldboard)(mm) | 820 |
| Blade range: left (moldboard)(ft) | 2.7 |
| Blade range: right (maximum shoulder reach)(mm) | 2000 |
| Blade range: right (maximum shoulder reach)(ft) | 6.6 |
| Blade range: left (maximum shoulder reach)(mm) | 2000 (outside of tyres) |
| Blade range: left (maximum shoulder reach)(ft) | 6.6 (outside of tires) |
| Operating weight on rear wheels (includes lubricants, coolant, fuel fuel tank)(kg) | 13150 |
| Operating weight on rear wheels (includes lubricants, coolant, fuel fuel tank)(lbs) | 28991.76 |
| Operating weight on front wheels (includes lubricants, coolant, fuel fuel tank)(kg) | 5371 |
| Operating weight on front wheels (includes lubricants, coolant, fuel fuel tank)(lbs) | 11841.63 |
| Fan speed (Max rpm) | 1500 |
| P-Mode Gear 1-3 @ 2,000 rpm (kW) | 120 |
| P-Mode Gear 1-3 @ 2,000 rpm (HP) | 161 |
| P-Mode Gear 4-6 @ 2,000 rpm (kW) | 134 |
| P-Mode Gear 4-6 @ 2,000 rpm (HP) | 179 |
| P-Mode Gear 7-8 @ 2,000 rpm (kW) | 146 |
| Moldboard details | Hydraulic power shift fabricated from high carbon steel. Includes replaceable metal wear inserts, cu |
| P-Mode Gear 7-8 @ 2,000 rpm (HP) | 196 |
| E-Mode (manual) Gear 1-6 @ 2,000 rpm (kW) | 107-120 |
| Arc radius (ft) | 1.1 |
| E-Mode (manual) Gear 1-6 @ 2,000 rpm (HP) | 143-161 |
| Arc radius (mm) | 329 |
| E-Mode (manual) Gear 7-8 @ 2,000 rpm (kW) | 134 |
| Cutting edge (mm) | 152 x 16 |
| E-Mode (manual) Gear 7-8 @ 2,000 rpm (HP) | 179 |
| Cutting edge (in) | 6 x 0.6 |
| P-Mode (manual) Gear 1-3 @ 2,000 rpm (HP) | 158 |
| P-Mode (manual) Gear 1-3 @ 2,000 rpm (kW) | 118 |
| P-Mode (manual) Gear 4-6 @ 2,000 rpm (kW) | 131 |
| Blade pull (kgf) | 11835 |
| P-Mode (manual) Gear 4-6 @ 2,000 rpm (HP) | 176 |
| P-Mode (manual) Gear 7-8 @ 2,100 rpm (HP) | 193 |
| P-Mode (manual) Gear 7-8 @ 2,100 rpm (kW) | 144 |
| E-Mode Gear 1-6 @ 2,000 rpm (HP) | 104-118 |
| E-Mode Gear 1-6 @ 2,000 rpm (kW) | 140-158 |
| E-Mode Gear 7-8 @ 2,000 rpm (kW) | 131 |
| Transmission (US gal) | 11.9 |
| E-Mode Gear 7-8 @ 2,000 rpm (HP) | 176 |
| Transmission (L) | 45 |
| Tandem housing (each)(US gal) | 15.05 |
| Tandem housing (each)(L) | 57 |
| Circle reverse housing (US gal) | 1.85 |
| Circle reverse housing (L) | 7 |
| Articulation, right or left (degrees) | 25° |
| Minimum turning radius for steering (ft) (in) | 23.95 |
| Minimum turning radius for steering (m) | 7.3 |
| Front axle type | Solid bar construction welded steel sections |
| Ground clearance at pivot (mm) | 620 |
| Ground clearance at pivot (in) | 24.41 |
| Wheel lean angle, right or left (degrees) | 20 |
| Oscillation, total (degrees) | 32 |
| Circle engineering details | Single piece rolled ring forging. Six circle support shoes with replaceable wear surface. Circle tee |
| Diameter (outside) (mm) | 1530 |
| Circle reversing control hydraulic rotation (degrees) | 360° |
| Oscillating welded box section (mm) | 520 x 202 |
| Oscillating welded box section (in) | 20.47 x 7.95 |
| Wheel axle spacing (mm) | 1525 |
| Tandem oscillation reverse (degrees) | 13 |
| Tandem oscillation forward (degrees) | 11 |
| Penetration force (kg) | 9202 |
| Pryout force (lbs) | 28710 |
| Pryout force (kg) | 13020 |
| Output (at engine rated rpm)(L/min) | 200 |
| Output (at engine rated rpm)(gpm) | 52.83 |
| Maximum system pressure(psi) | 2986.89 |
| Standby pressure(psi) | 493 |
| Standby pressure(MPa) | 3.4 |
| Maximum system pressure(MPa) | 20.6 |
| Drawbar details | A-shaped, u-section press formed and welded construction for maximum strength with a replaceable dra |
| Drawbar frame(mm) | 210 x 25 |
| Gauges | Articulation, engine coolant temperature, fuel level, speed meter, transmission shift indicator, engine tachometre, torque converter oil temperature. |
| Bearings | Tapered roller |
| Tire rims (demountable) | 10 three piece rims |
| Warning lights/ Indicator | Battery charge, brake oil pressure, blade float, brake oil pressure, inching temperature, directional indicator, engine oil pressure, hydraulic oil temperature, heater signal, lift arm lock, parking brake, differential lock, torque converter oil temperature, ecology, P mode, fan reverse, rpm set, high beam, working lights. |
| Blade (in) | 3.71 |
| Blade (mm) | 146.0 |
| Blade range: right (circle centre shift)(mm) | 590 |
| Blade range: left (circle centre shift)(mm) | 550 |
| Blade range: left (circle centre shift)(ft) | 1.8 |
| Blade range: right (circle centre shift)(ft) | 1.9 |
| Standby pressure(kg/cm²) | 35 |
| Maximum system pressure(kg/cm²) | 210 |
| Blade length (ft) | 14.2 |
| Blade length (m) | 4.32 |
| Total operating weight (kg) | 18520 |
| Blade down pressure (kg) | 8920 |
| Total operating weight (lbs) | 40826.3 |
