John Deere

9RX 490 Scraper Special Tractor

Name: 9RX 490 Scraper Special Tractor
Brand: John Deere
SKU: JOHNDEERE-9800RW

رقم القطعة: JOHNDEERE-9800RW

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

9RX 490 Scraper Special Tractor

المواصفات

Displacement	827 cu in. (13.55L)
Model	9RX 490 Scraper Special
Base Code	9800RW
Division	tractors
Product Family	scraper-systems
Engine	Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Rated Speed	2,100 rpm
TRANSMISSIONS / Alternator/Battery	250 amps / 12 Volt – 330 amps / 12 Volt Available
TRANSMISSIONS / Total cold cranking amps	2775 (3-925CCA) / 3700 (4-925CCA)
CAPACITIES / DEF tank	120 L (31.7 gal)
CAPACITIES / Fuel tank	1514 L (400 gal)
Manufacturer	JD14 (13.6L-827 cu.in)
Aspiration	Single wastegated turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Filter, engine air	Dual stage with exhaust aspiration
Bore and stroke	5.2 in. (132 mm) x 6.5 in. (165 mm)
Compression ratio	15.9:1
Lubrication	Full-pressure, full-flow filtration with bypass
CAPACITIES / Cooling system	56.5 L (14.9 gal)
CAPACITIES / Crankcase with filter	64 L (16.9 gal)
MISCELLANEOUS / Degrees of Articulation	36°
MISCELLANEOUS / Degrees of Oscillation	15°
MISCELLANEOUS / Degrees of Undercarriage Oscillation	±10°
Rated PTO Power (hp SAE) at Rated PTO Speed (1895 erpm)**	335 hp (249 kW)
Rated Engine Power PS (hp ISO) at Rated Engine Speed (EU 2016/1628)*	490 hp (360 kW)
Max Engine Power PS (hp ISO) at Max Engine Power Speed (EU 2016/1628)*	539 hp (396 kW)
Filter, oil	Replaceable spin-on style oil filter
STEERING / Hydraulic power-steering	Standard
STEERING / Active Command Steering (ACS)	Available
CAPACITIES / Hydraulic/Transmission/Axle oil without 3-point rear hitch and without PTO	234.7 L (62 U.S. gal)
CAPACITIES / Hydraulic/Transmission/Axle oil with 3-point rear hitch and PTO	242.3 L (64 U.S. gal)
MISCELLANEOUS / Estimated shipping weight	25,546 kg (56,320 lb) - Tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
TRANSMISSIONS / e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™ ELECTRICA	Standard
TRANSMISSIONS / Batteries	3
MISCELLANEOUS / Estimated shipping weight for tractor equipped with standard tracks,	Narrow undercarriage: 24,639 kg (54,320lb)
STEERING / Category 4N with Quik-Coupler	Available: 6804 kg (15000 lb)
MISCELLANEOUS / no PTO, and no 3-point rear hitch	Wide undercarriage: 25,546 kg (56,320 lb)
AXLE FINAL DRIVES / Bull gear and double idler with floating pinion	Standard
AXLES / Rear axle supports	Available (With 30 or 36 inch tracks)
AXLES / Front axle supports	Available (With 30 or 36 inch tracks)
AXLES / TRACK BELTS	Camso ® 6500 Scraper series tracks
STEERING / HYDRAULIC SYSTEM (TYPE)	Closed-center, pressure/flow compensated
STEERING / Selective control valves	4 - 8 factory or field installed
STEERING / Maximum pressure	2,900 psi (20,000 kPa )
STEERING / Maximum pump flow with Base Hydraulics	Standard: 208 L/min 55 gpm
STEERING / Maximum pump flow: high-flow	Available: 416 L/min 110 gpm
STEERING / 3-POINT HITCH	Electric-Hydraulic 3-Point Hitch with Draft Sensing
STEERING / Category 4/4N with Quik-Coupler	Available: 6804 kg (15000 lb)
DRAWBAR*** / Drawbar Support for Long Scraper Drawbars	NA
DRAWBAR*** / AUTOTRAC™ READY	Standard
DRAWBAR*** / Modular Telematics Gateway (MTG)	Available JDLink™ Ultimate and Ethernet Harnesses (availability dependent upon destination)
DRAWBAR*** / SERVICEADVISOR™ REMOTE	Available with JDLink™ hardware and activations
DRAWBAR*** / ISOBUS Implement Connection	Standard (ISO 11783)
DRAWBAR*** / BRAKES	Hydraulic power, wet-disk, self adjusting
DRAWBAR*** / Hydraulic power, wet disk, self adjusting on front and rear axle	Standard
DRAWBAR*** / Hydraulic trailer brakes	Available
DRAWBAR*** / Drawbar Support for Short Scraper Drawbars PTO (Power Take Off), Rear, Independent	NA
DRAWBAR*** / 1-³/ 4 in., 20-spline, 1,000-rpm	Available
STEERING / Available flow at a single SCV - ¹/ 2 in. coupler	35 U.S. gpm/132 lpm
STEERING / Available flow at a single SCV with high-flow - ³/ 4 in. coupler	Field Installed Option - 45 U.S. gpm/170 lpm
MISCELLANEOUS / WHEELBASE LENGTH load when drawbar is in short position. Values are based on factory	163.5 in. (4154 mm)