DrainLift SANI CUT-M.42/T540/1-CEE

Wilo

DrainLift SANI CUT-M.42/T540/1-CEE

رقم القطعة: wilo-6095526

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Design Ready for connection and fully submersible single-pump lifting unit with macerator hydraulics for pumping sewage containing faeces. Application As a lifting unit for floor-mounted or concealed wall installation in buildings, or for concealed floor installation in pump chambers: - In cases where sewage cannot be discharged directly into the sewer system through a natural downward slope - For backflow resistant drainage in cases where the discharge point is below the backflow level Equipment/function - Switchgear with mains-independent alarm and collective fault signal - Ready-to-plug - Tank with inspection opening and transparent cover - Level sensor 4 … 20 mA for level measurement - Non-return valve - Thermal motor monitoring with bimetallic sensor Technical data - Mains connection: 1~230 V, 50 Hz; 3~400 V, 50 Hz - Operating mode: S3 10% - Fluid temperature: 3 ... 40 °C (37 ... 104 °F), 65 °C (149 °F), 5 min - Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F) - Tank volume: 64 l (16 US.liq.gal.) - Max. usable volume in the tank according to the inlet height: 29 l/7 US.liq.gal. (180 mm*)/39 l/10 US.liq.gal. (250 mm*)/48 l/12 US.liq.gal. (315 mm*) - Discharge port: DN 32/40, PN 6; 40 mm, PN 6 - Inlet connection: DN/OD 110; DN/OD 160 - Ventilation connection: DN/OD 50 - IP rating of lifting unit: IP68 (2 mWC/7 d) - IP rating of switchgear: IP54 - Noise level: 70 dB(A) Materials - Motor housing: 1.4404 (AISI 316L) - Hydraulics: EN-GJL-250 (ASTM A48 Class 35/40B) - Impeller: EN-GJL-250 (ASTM A48 Class 35/40B) - Macerator: 1.4528/59 HRC (AISI 440B+Co) - Tank: PE - Non-return valve: EN-GJL-250 (ASTM A48 Class 35/40B) Scope of delivery - Lifting unit with pre-wired switch gear - Version with plug: connection cable with plug - Version "O": without connection cable and plugLifting unit with pre-wired switch gear - Pipe connection DN/OD 40 - HT double socket DN/OD 50 for ventilation connection - HT double socket DN/OD 50 for drain connection - Inlet set with hole saw 124 mm (5 in) and seal for HT pipe DN/OD 110 - Floor fixation set - Noise insulation mat - 9 V rechargeable battery - Installation and operating instructions

منتجات مشابهة

طلمبات