Yonos MAXO-D 32/0,5-11 PN 6/10

Wilo

Yonos MAXO-D 32/0,5-11 PN 6/10

رقم القطعة: wilo-2120663

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Design Glandless circulator with threaded connection or flange connection, EC motor with automatic power adjustment. Application Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems. Equipment/function Operating modes - Δp-c for constant differential pressure - Δp-v for variable differential pressure - n = constant (3 speed stages) Manual functions - Setting the operating mode - Setting of pump output (delivery head) - Setting the speed stages Automatic functions - Infinitely variable power adjustment according to the operating mode - Deblocking function - Soft start - Integrated full motor protection Signal and display functions - Collective fault signal (potential-free NC contact) - Fault signal light - LED segment display for displaying the delivery head and fault codes - Display of the set speed stages (C1, C2 or C3) Double pump function - Main/standby operation: for an automatic fault-actuated switchover the Connect Module Yonos MAXO can be used. - Predefined control mode and set delivery head must be identical for both pumps. Equipment - Wrench attachment point on pump body (for threaded pipe union pumps) - Quick electrical connection with Wilo plug. For the connection of the mains and SSM lines, with integrated strain relief - For flange-end pumps: Flange versions - Standard version for pumps DN 32 to DN 65: Combination flange PN 6/10 (flange PN 16 acc. to EN 1092-2) for counter flanges PN 6 and PN 16 - Standard version for DN 80 pumps: PN 6 flange (designed for PN 16 according to EN 1092-2) for PN 6 counter flange Technical data - Permissible temperature range of -20 °C to +110 °C - Mains connection 1~230 V, 50/60 Hz - IP rating IPX4D - DN 30 screwed connection (RP 1¼) - Flange connection DN 32 to DN 80 - Max. operating pressure of standard version: 6/10 bar or 6 bar (special version: 10 bar) Materials - Pump housing: grey cast iron with cataphoretic coating - Shaft: Stainless steel - Bearing: carbon, metal impregnated - Impeller: Plastic Scope of delivery - Pump - Gaskets for threaded connection - Washers for flange screws (for nominal connection diameters DN 32 – DN 65) - Installation and operating instructions

منتجات مشابهة

طلمبات