RAIN1-24 EM
رقم القطعة: wilo-2551468
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
Design Ready-to-plug single-pump rainwater utilisation system Application Rainwater utilisation system is designed for applications that do not require drinking water supply such as: - Toilets flushing tanks - Washing machines - Garden irrigation(Please check that the application complies with local regulations) Equipment/function Ready for connection module with compact construction, consisting of: - HiMulti 3 P self-priming centrifugal pump, mounted on a base frame with vibration absorbers - 11 l break tank for fresh water replenishment with float valve - 3-way valve - Connection on the pressure side, Rp 1" hose - Connection on the suction side, Rp 1" hose - Connection for municipal water supply network R ¾" - 1.5 m mains connection cable and plug - Float switch with 20 m cable for rainwater level monitoring in the storage tank - Potential-free contact available for optional external alarm or fault message - Relay for optional submersible pump (rainwater storage tank pump) - Electronic control device with integrated zero flow detection and analogue pressure sensor on the pressure side - Operating panel with pushbuttons, 7 segment display and LEDsMain functions: - Fully automatic rainwater utilisation - Operating and fault messages - Dry-running protection of pump - Self-priming support - Automatic water replacement break tank - Permanent display for the fill level in the rainwater storage tank, system pressure on the pressure side, operating status of the control interface Technical data - Mains connection: 1~230 V, 50 Hz - Connection cable: 1.5 m length - IP rating: IPX4 - Motor with integrated thermal motor protection probe - Max. operating pressure: 8 bar - Triggering pressure: 1.5 bar - Max. suction head: 8 m - Max. fluid temperature: +5 °C to +30 °C - Ambient temperature: +5 °C to +40 °C - Break tank volume: 11 litres - Nominal connection diameters: - Pressure connection Rp 1" thread, union nut - Suction connection Rp 1" thread, union nut - Connection for municipal water supply network at float valve R ¾" (male thread) Materials HiMulti 3 P: - Pump housing in Technopolymer - Impellers and stage casing made of Noryl 30% GF - Pump cover and shaft made of stainless steel - Mechanical seal made of ceramic/carbon Scope of delivery - Ready-to-connect rainwater utilisation system with fixation material - Installation and operating instructions - Float switch - Sticker ”Do not expose to frost” - Sticker ”No drinking water”
