Stratos GIGA2.0-D 100/1-11/4,0-R1
رقم القطعة: wilo-2248092
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: wilo-2248092
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
Design High-efficiency in-line twin-head pump with IE5 motor and electronic power adjustment in glanded pump design. Version as single-stage low-pressure centrifugal pump with flange connection and mechanical seal. Application The pumping of heating water (in accordance with VDI 2035), chilled water and water-glycol mixtures without abrasive substances in heating, chilled water and cooling systems. Equipment/function Field of application The pump facilitates an operation with highest system efficiency via precise setting of the control mode for the system-specific application. Heating - Radiator - Underfloor heating - Ceiling heating - Fan heater - Concrete core heating - Hydraulic separator - Differential pressure-less distributor - Heating buffer tank - Heat exchanger - Heat source loop (heat pump) - District heating loop Cooling - Ceiling cooling - Underfloor cooling - Air-conditioning devices - Concrete core cooling - Hydraulic separator - Differential pressure-less distributor - Cooling buffer tank - Heat exchanger - Condenser cooling loop - District cooling loop Heating and cooling combined - Automatic switchover Control modes - Constant speed (n-constant) - Δp-c for constant differential pressure - Δp-v for variable differential pressure - Dynamic Adapt plus for continuous (dynamic) adjustment of the delivery rate to the current requirement - T-const. for constant temperature control - ΔT for differential temperature control - Constant volume flow control (Q constant) - Multi-Flow Adaptation: Dynamic total volume flow determination through the feeder pump for the needs-based supply of secondary pumps to distributors - User-defined PID control Optional functions - Q-Limitmax. for limiting the maximum volume flow - Q-Limitmin. for limiting the minimum volume flow - Index circuit evaluator (Δp-c control with external actual value differential pressure sensor) - Variable pitch adjustment of Δp-v characteristic curve - No-Flow Stop (zero-flow-rate-deactivation) Manual settings - Selection of the field of application in the setting assistant - Setting the related operating parameters - Nominal duty point: direct input of calculated duty point H and Q at Δp-v - Correction of viscous fluids via adjustment of viscosity and density - Status display - Setting and resetting the energy meters (heating and cooling) - Key lock for disabling the settings - Function for resetting the factory settings or the saved restoration points (parameter sets) - Parameterising the analogue inputs - Parameterising the binary inputs - Parameterising the relay outputs - Dual-pump function Automatic functions - Power adjustment according to requirements for energy-efficient operation depending on the operating mode - Automatic troubleshooting routines - Switchover between heating and cooling mode - Integrated full motor protection - Deactivation at zero flow rate (No-Flow Stop) - Continuous operating data memory - Time stamp for errors/warnings and historical operating data External control inputs and outputs and their functions - 4x analogue input: - Signal types: 0 – 10 V, 2 – 10 V, 0 – 20 mA, 4 – 20 mA, PT1000 (only with two analogue inputs) - Application: Differential pressure sensor (installed on the pump in series as standard), remote adjustment of the setpoints in every control mode (except Multi-Flow Adaptation), sensor inputs for e.g. temperature, differential pressure sensor for index circuit evaluator at a remote point in the system or free sensor in user-defined PID operating mode - 2 x digital inputs: - For potential-free control outputs or switch - Parametrisable functions: - Ext. OFF - Ext. MIN - Ext. MAX - MANUAL (building automation BA OFF) - Key lock - Switchover between heating and cooling mode - 2x relay output: - Collective fault signal SSM (potential-free changeover contact) - Collective run signal SBM (potential-free changeover contact) - Wilo Net - For dual-pump management of 2 single pumps; communication of several pumps with…

Wilo
اطلب عرض سعر

Wilo
اطلب عرض سعر

Wilo
اطلب عرض سعر

Wilo
اطلب عرض سعر

Wilo
اطلب عرض سعر

Wilo
اطلب عرض سعر

Wilo
اطلب عرض سعر

Wilo
اطلب عرض سعر