Yonos GIGA-N 125/200-15/4-P5-R1

Wilo

Yonos GIGA-N 125/200-15/4-P5-R1

رقم القطعة: wilo-6089007

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Design Electronically controlled, single-stage low-pressure centrifugal pump with axial suction. Mounted on a baseplate with flange connection and automatic power adjustment. Application - The pumping of heating water (in accordance with VDI 2035), chilled water and water-glycol mixtures without abrasive substances in heating, chilled water and cooling systems. - Applications for irrigation, building services, general industry, power stations, etc. Equipment/function Single-stage low-pressure centrifugal pump in close-coupled design with coupling, coupling guard, motor and baseplate - Drive with integrated electronic speed control - Mechanical seal Operating modes - Δp-c for constant differential pressure - PID-Control - Constant speed (n=constant) Manual operation level - Green button and display Manual functions - Differential pressure setpoint setting - Setting the speed (manual control mode) - Setting the operating mode - Setting the pump ON/OFF - Configuration of all operating parameters - Fault acknowledgement External control functions - "Overriding Off" control input - Analogue input 0 – 10 V, 0 – 20 mA for constant speed (DDC) and remote setpoint adjustment - Analogue input 2 – 10 V, 4 – 20 mA for constant speed (DDC) and remote setpoint adjustment - Analogue input 0 – 10 V for actual value signal from pressure sensor - Analogue input 2 – 10 V, 0 – 20 mA, 4 – 20 mA for actual value signal from pressure sensor Signal and display functions - Collective fault signal SSM - Collective run signal SBM Data exchange - Infrared interface for wireless data exchange with IR-Monitor/IR-Stick - Plug-in position for Wilo IF-Modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions - Full motor protection with integrated trip electronics - Access disable Dual pump management (2 x single pump; Y-piece application only) - Main/standby operation (automatic fault-actuated switchover) - Pump alternation main/standby operation after 24 hours - Parallel operation Technical data - Fluid temperature -20 °C to +140 °C - Mains connection - 3~440 V ±10 %, 50/60 Hz - 3~400 V ±10 %, 50/60 Hz - 3~380 V -5/+10 %, 50/60 HzCompliance with electromagnetic compatibility without additional measures: - - Interference emission for residential environment according to EN 61800-3:2018 - Interference immunity for industrial environments according to EN 61800-3:2018 - IP rating IP55 - Nominal diameter DN 32 to DN 150 - Max. operating pressure 16 bar Materials - Pump housing and lantern. Standard: EN-GJL-250 - Impeller: Standard: EN-GJL-200; others on request - Shaft: 1.4021 - Mechanical seal: AQEGG; other mechanical seals on request Scope of delivery - Pump - Installation and operating instructions - Completely mounted pump on baseplate with coupling, coupling guard and electric motor

منتجات مشابهة

طلمبات