Yonos GIGA2.0-I 125/1-9/3,0-R1

Wilo

Yonos GIGA2.0-I 125/1-9/3,0-R1

رقم القطعة: wilo-2205149

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Design High energy efficiency in-line pump with IE5 motor (0.37 – 7.5 kW) or IE4 motor (11 – 22 kW) and electronic power adjustment in glanded pump design. Version as single-stage low-pressure centrifugal pump with flange connection and mechanical seal. Application The pumping of heating water (in accordance with VDI 2035), chilled water and water-glycol mixtures without abrasive substances in heating, chilled water and cooling systems. Equipment/function Control modes: - Δp-v for variable differential pressure - Δp-c for constant differential pressure - Constant speed - User-defined PID control Manual settings: - Setting the control mode - Setting the related operating parameters - Parameterising the analogue inputs - Parameterising the digital input - Parameterising the relay outputs - Dual-pump function (for 2 single pumps, which should be operated as a two-pump system) - Key lock for disabling the settings - Function for resetting to factory setting Automatic functions: - Power adjustment according to requirements for energy-efficient operation depending on the control mode - Automatic troubleshooting routines - Integrated full motor protection External control inputs and outputs and their functions - 1 x analogue input: - Signal types: 0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA - Application: only sensor value from differential pressure sensor (installed serially on the pump as standard) - 1 x analogue input: - Signal types: 0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA - Application: only external setpoint sensor - 1 x digital input: - Control input for “External OFF” function - 2x relay output: - Collective fault signal SSM (potential-free changeover contact) - Collective run signal SBM (potential-free changeover contact) - Wilo Net - For dual-pump management of 2 single pumps Signal and display functions - Display status of "Operation display": - Current control mode - Setpoint - Actual delivery head - Actual speed - Actual volume flow - Electrical power consumption - Status display LED: Faultless operation (green LED), pump communication (blue LED) - Display status of "Display fault" (display red): - Error codes - Display status of "Display warning" (display yellow): - Warning codes - Display status of "Process indicator" (display blue): - Display status of "Building automation (BA) communication" (display blue): - Summary of the active building automation (BA) parameters (baud rate, address, etc.) - Collective fault signal SSM (potential-free changeover contact) - Collective run signal SBM (potential-free changeover contact) Data exchange - Possible with accessories of corresponding Wilo-CIF modules: - Serial digital Modbus RTU interface for connection to building automation (BA) via RS485 bus system - Serial digital BACnet MS/TP interface for connection to building automation (BA) via RS485 bus system - Serial digital interface for Ethernet Multiprotocol Modbus TCP, BACnet/IP for connection to building automation (BA) via RJ45 bus system - Serial digital LON interface for connection to building automation (BA) via LONWorks bus system - Serial digital PLR interface for connection to BA via company-specific coupling module - Serial digital CANopen interface for connection to BA via company-specific coupling module Dual-pump management (twin-head pump or 2 x single pumps in Y-piece) - Main/standby operation (time-dependent pump alternation) - Main/standby operation (automatic fault-actuated switchover) - Parallel operation (efficiency-optimised peak load cut-in and out) Equipment - Pump hydraulics with minimum efficiency index MEI ≥ 0.4 - EC motor (0.37 – 7.5 kW) of efficiency class IE5 / AC motor (11 – 22 kW) of efficiency class IE4 in accordance with IEC 60034-30-2 - Flange PN 16 – according to EN 1092-2 - Pressure measuring connections (R 1/8) for mounted differential pressure sensor (version ...-R1 without differential pressure sensor) - Standard condensate drainage holes in the lantern and in the motor…

منتجات مشابهة

طلمبات