Isar MODH1-E-3-CH3-LE-603-EM

Wilo

Isar MODH1-E-3-CH3-LE-603-EM

رقم القطعة: wilo-4258972

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Design Pressure-boosting system with two or three non-self-priming stainless steel high-pressure multistage centrifugal pumps switched in parallel Application - Fully automatic water supply and pressure boosting in inlet mode, either from the public water supply network or from a tank, for domestic, commercial, industrial and municipal applications (e.g. residential, office, administration buildings, hotels, hospitals, trades, industry, water supply companies). - Pumps drinking water, process water, cooling water or other industrial water, which does not affect the materials used, neither chemically nor mechanically, and does not have any abrasive or long-fibre constituents. Equipment/function - 2 or 3 Medana CH3-LE pumps per system - Components that come in contact with the fluid are corrosion-resistant - Electrogalvanised base frame with height-adjustable oscillation absorbers for insulation against structure-borne noise - Stop valve on every pump on the suction and discharge sides - Non-return valve, on the discharge side - Pressure sensor, on the end pressure side - Pressure gauge optional, on the suction side - Pressure gauge, on the end pressure side - Low-water cut-out switchgear - Multi-leader control via integrated variable frequency drives Technical data - Mains connections: - 3~400 V ± 10%, 50 Hz; - 3~380/440 V ±10%, 60 Hz, - also depending on type: 1~230 V, 50/60 Hz (other versions on request) - Max. fluid temperature: 50 °C (70 °C optional) - Max. ambient temperature: 40 °C - Operating pressure: 10 bar - Inlet pressure: 6 bar - Nominal connection diameter for end discharge side: R 2"/DN 100 - Nominal connection diameter inlet side: R 2"/DN 100 - IP rating: IP54 - Fuse on mains side: A, AC 3 according to motor power and EVU regulations - Approved fluids (other fluids on request): Approved fluids are generally waters which do not attack the materials used, neither chemically nor mechanically, and do not contain any abrasive or long-fibre constituents. - Cooling water - Drinking and process water Materials Single pump: - Impellers, stage chambers and pump housing made of stainless steel 1.4301/1.4404 - Shaft of stainless steel 1.4404 - EPDM gasket (EP851)/FKM (Viton) - Mechanical seal made of tungsten carbide/carbon - Bearing of tungsten carbide - Pump support foot made of aluminium Scope of delivery - Factory-mounted, pressure-boosting system ready for connection and checked for functionality and impermeability - Installation and operating instructions - Factory test protocol

منتجات مشابهة

طلمبات