Comfort CO-5 MVI 7004/CC

Wilo

Comfort CO-5 MVI 7004/CC

رقم القطعة: wilo-2523228

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Design Pressure-boosting system with 2 to 6 parallel-switched, non-self-priming stainless steel high-pressure multistage centrifugal pumps Application - Fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and industrial systems. - Pumping of drinking water and process water, cooling water, fire water (apart from fire-fighting systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents. Equipment/function - 2-6 pumps of the MVI series per system - Automatic pump control via CC Controller - Components that come in contact with fluid are corrosion-resistant - Base frame galvanised, with height-adjustable vibration absorbers for insulation against structure-borne noise - Check valve at each pump, on the suction and pressure sides - Non-return valve, pressure side - Diaphragm pressure vessel 8 l, PN16, pressure side - Pressure sensor, on the discharge side - Optional pressure gauge, suction side - Pressure gauge, discharge side - Optional low-water cut-out switchgear Technical data - Mains connection 3~230 V/400 V ± 10%, 50 Hz - Max. fluid temperature 50 °C (70 °C optional) - Operating pressure 16 bar (25 bar optional) - Inlet pressure 10 bar - Nominal connection diameters on discharge side R 1½ ‐ DN 200 - Nominal connection diameter on the intake side R 1½" - DN 200 - Rated speed 2850 rpm - IP rating IP54 (CC control device) - Fuse protection on mains side AC 3 according to motor power and EVU regulations - Approved fluids (other fluids on request):Note on fluids: Approved fluids are generally water mixtures which do not chemically or mechanically attack the materials used and do not contain either abrasive or fibrous matter - Drinking water and domestic hot water - Cooling water - Fire water Materials MVI 1.. to 16..‐6 - Impellers and stage chambers made of 1.4301/1.4404 stainless steel (MVI 16..‐6 only in 1.4301) - Pump housing made of 1.4301/1.4404 stainless steel - Shaft 1.4301/1.4404 stainless steel - Gasket EPDM (EP 851) / FKM (Viton) - Housing cover made of 1.4301/1.4404 stainless steel - Housing bottom 1.4301/1.4404 stainless steel - Mechanical seal B-carbon/tungsten carbide, SiC/carbon - Pressure shroud 1.4301/1.4404 stainless steel - Bearing, tungsten carbide - Pump base EN-GJL-250 - Pipework made of 1.4404 stainless steel MVI 16.. to 95.. - Impellers 1.4301/1.4404 stainless steel - Stage chambers 1.4301/1.4404 stainless steel - Pump housing EN-GJL-250/1.4404 - Shaft 1.4057/1.4404 stainless steel - Gasket EPDM (EP 851) / FKM (Viton) - Housing cover made of 1.4301/1.4404 stainless steel - Housing bottom 1.4301/1.4404 stainless steel - Mechanical seal B-carbon/tungsten carbide, SiC/carbon - Pressure shroud 1.4301/1.4404 stainless steel - Bearing, tungsten carbide - Pipework made of 1.4404 stainless steel Scope of delivery - Factory-mounted, connection-ready pressure-boosting system checked for functionality and impermeability - Packaging - Installation and operating instructions

منتجات مشابهة

طلمبات