High Head IGP Series Grinder Pump IGPHR-M231-30

Franklin Electric

High Head IGP Series Grinder Pump IGPHR-M231-30

رقم القطعة: franklin-electric-515700

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

FPS IGP Series grinder pumps are ideal for residential and light commercial sewage waste transfer where high head conditions exist FPS IGPH Manual Series grinder pumps are ideal for residential and light commercial sewage waste transfer where higher head conditions exist. Features and benefits: - Vertical 1-1/4" FNPT discharge - Dual stage hydraulics - Carbon/Ceramic mechanical seal - Deflection-resistant, short motor shaft - Corrosion-resistant upper and lower brass impellers minimize downtime and maintenance - Tight cutting clearances for superior grinding at 414,000 cuts per minute - Epoxy-coated finish for corrosion resistance and durability - Built-in overload protection prevents over-current and over- temperature damage - IGPH Automatic Series include internally mounted start components - IGPH Manual Series single-phase products require a specific control panel or capacitor kit from FPS, matched to the pump for proper operation and third-party approval - Engineered Products IGPH Series Grinder Pumps are ideal for sewage waste transfer

المواصفات

HP 60Hz2 hp
Frequency60 Hz
PhasesSingle-Phase
Amps - Full Load16 A
Volts230 VAC
Lead Length30 ft
Continuous DutyYes
Shut Off180 ft
Shut Off 60 Hz200 ft
Stages2
Motor CoolingFully Submerged
Maximum Fluid Temperature104 °F
ImpellerVortex
Impeller MaterialBrass
Intake Screen MaterialStainless Steel
SealMechanical Seal
DischargeThreaded - FNPT
Discharge Diameter1.25 "
Product Weight107 lb
Product Weight with Pack112 lb
Carton Length14 "
Carton Width11 "
Carton Height23 "
Electrical Agency ApprovalscCSAus
Warranty Standard Time12 Month Install / 24 Month Manufacturing
ApplicationsResidential and light commercial sewage waste transfer where higher head conditions exist.
Item #515700
ModelIGPHR-M231-30
SeriesManual High-Head Grinder Pump
Product familyHigh Head IGP Series Grinder Pump
Pump Length10.9 "
HP 120Hz2 hp
Starting Amps73 A
Motor Insulation ClassificationF
Maximum Flow Rate - 60 Hz30 gpm
Pump rpm - 60 Hz3450
Motor Shaft End - MaterialStainless Steel
Seal MaterialCarbon Ceramic
Motor Fill SolutionOil (white oil)
Volute / Side Inlet MaterialCast Iron
Pump Height16.3 "
Pump Width9.6 "
Shaft Diameter1.13 "
Minimum Flow Rate - 60 Hz9 gpm
Minimum Head - 60 Hz100 ft
Rotating Cutter MaterialAISI 440C Rockwell 55-60C
Stationary Cutter MaterialAISI 440C Rockwell 55-60C
Impeller Diameter5.55 "

منتجات مشابهة

طلمبات