NC Series Solids Handling Pump 3NC-323P3-184

Franklin Electric

NC Series Solids Handling Pump 3NC-323P3-184

رقم القطعة: franklin-electric-87109899-01

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

200/230V, 3PH, 3HP Non-Clog Pump, 3-inch Discharge, 184mm Two-Vane Semi-Open Ductile Iron impeller, 50ft Cord The FPS NC Series of solids handling pumps is a versatile wastewater transfer solution available in a three through 20 horsepower range with 3- and 4-inch discharge options. Offering flows up to 940 gallons per minute and heads up to 114 feet, the NC Series is engineered for durability and ease of maintenance, ensuring reliable performance in the toughest conditions. Single- and three-phase power options offer flexibility to meet application needs. Features and benefits: - Energy-Efficient Solution: Air-filled IE3 premium-efficient Class H motors, available on 7.5 to 20HP models, offer improved motor efficiency, prolonging pump life and reducing total cost of ownership - Built to Last: AISI 420 stainless steel pump shaft designed for long resistance life and increased strength - Optimal Performance: Semi-open impeller improves efficiency and solids handling capability - Improved Durability: Ductile iron impellers are less brittle when handling rigid debris versus competitive cast iron versions - Simplified On-Site Maintenance: Field adjustable wear plate provides clearance between the impeller and volute for simplified maintenance, minimizing operational downtime without the need and additional cost of a replaceable wear ring - Longer Seal Life: Standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance - Protective Seal Fail Probe: The seal fail probe will immediately send a signal to the control panel once the first mechanical seal is breached to alert for needed service - Corrosion Resistance Coating: All castings are powder coated and offer a smooth finish that is easy to clean - Retrofit Capabilities: Optional elbow adapters and rail systems components available

المواصفات

HP 60Hz3 hp
Frequency60 Hz
PhasesThree-Phase
Amps - Full Load16 A
Volts200 VAC / 230 VAC
Lead Length50 ft
Continuous DutyYes
Shut Off46 ft
Shut Off 60 Hz50 ft
Motor CoolingFully Submerged
Maximum Fluid Temperature104 °F
Pump Body MaterialCast Iron
ImpellerSemi-open
Impeller MaterialDuctile Iron
Intake Screen MaterialCast Iron
SealMechanical Seal
DischargeFlange
Discharge Diameter3 "
Product Weight250 lb
Product Weight with Pack260 lb
Carton Length20.87 "
Carton Width18.9 "
Carton Height35.83 "
Electrical Agency ApprovalscCSAus
Warranty Standard Time24 Months
ApplicationsCommercial and Industrial sewage, effluent, irrigation and general de-watering.
Item #87109899-01
Model3NC-323P3-184
Series3NC Three-Phase Model
Product familyNC Series Solids Handling Pump
Pump Length15.6 "
HP 120Hz3 hp
Amps at 230 Volts15 A
Motor Insulation ClassificationF
Maximum Flow Rate - 60 Hz475 gpm
Pump rpm - 60 Hz1750
Pump Base MaterialCast Iron
Motor Shaft End - Material420 Stainless Steel
Seal MaterialSilicon Carbide / Silicon Carbide / NBR
Motor Fill SolutionOil (white oil)
Volute / Side Inlet MaterialCast Iron
Pump Height28.5 "
Pump Width12.1 "
Shaft Diameter1 "
Minimum Flow Rate - 60 Hz55 gpm
Minimum Head - 60 Hz10 ft
Impeller Diameter7.24 "
Max Solid Handling Size2.5 "
Wear PlateAdjustable/Replaceable Class 20/25 equivalent cast iron

منتجات مشابهة

طلمبات