NC Series Solids Handling Pump 4NC-357P3-146

Franklin Electric

NC Series Solids Handling Pump 4NC-357P3-146

رقم القطعة: franklin-electric-87110393-01

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

4NC-357P3-146, 575V, 3PH, 3HP Non-Clog Pump, 4-inch Discharge, 146mm Impeller, 50Ft Cord The FPS NC Series of solids handling pumps is a versatile wastewater transfer solution available in a three through 20 horsepower range with 3- and 4-inch discharge options. Offering flows up to 940 gallons per minute and heads up to 114 feet, the NC Series is engineered for durability and ease of maintenance, ensuring reliable performance in the toughest conditions. Single- and three-phase power options offer flexibility to meet application needs. Features and benefits: - Energy-Efficient Solution: Air-filled IE3 premium-efficient Class H motors, available on 7.5 to 20HP models, offer improved motor efficiency, prolonging pump life and reducing total cost of ownership - Built to Last: AISI 420 stainless steel pump shaft designed for long resistance life and increased strength - Optimal Performance: Semi-open impeller improves efficiency and solids handling capability - Improved Durability: Ductile iron impellers are less brittle when handling rigid debris versus competitive cast iron versions - Simplified On-Site Maintenance: Field adjustable wear plate provides clearance between the impeller and volute for simplified maintenance, minimizing operational downtime without the need and additional cost of a replaceable wear ring - Longer Seal Life: Standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance - Protective Seal Fail Probe: The seal fail probe will immediately send a signal to the control panel once the first mechanical seal is breached to alert for needed service - Corrosion Resistance Coating: All castings are powder coated and offer a smooth finish that is easy to clean - Retrofit Capabilities: Optional elbow adapters and rail systems components available

المواصفات

HP 60Hz3 hp
Frequency60 Hz
PhasesThree-Phase
Amps - Full Load4.5 A
Volts575 VAC
Lead Length50 ft
Continuous DutyYes
Shut Off24 ft
Shut Off 60 Hz30 ft
Motor CoolingFully Submerged
Maximum Fluid Temperature104 °F
Pump Body MaterialCast Iron
ImpellerSemi-open
Impeller MaterialDuctile Iron
Discharge MaterialCast Iron
SealMechanical Seal
DischargeFlange
Discharge Diameter4 "
Product Weight260 lb
Product Weight with Pack270 lb
Carton Length20.87 "
Carton Width18.9 "
Carton Height35.83 "
Electrical Agency ApprovalscCSAus
Warranty Standard Time24 Months
ApplicationsCommercial and Industrial sewage, effluent, irrigation, and general de-watering.
Item #87110393-01
Model4NC-357P3-146
Series4NC Three-Phase Model
Product familyNC Series Solids Handling Pump
Pump Length16.4 "
HP 120Hz3 hp
Motor Insulation ClassificationF
Maximum Flow Rate - 60 Hz300 gpm
Pump rpm - 60 Hz1750
Pump Base MaterialCast Iron
Motor Shaft End - Material420 Stainless Steel
Seal MaterialSilicon Carbide / Silicon Carbide / NBR
Motor Fill SolutionOil (white oil)
Volute / Side Inlet MaterialCast Iron
Pump Height27.2 "
Pump Width12.1 "
Shaft Diameter1 "
Minimum Flow Rate - 60 Hz100 gpm
Minimum Head - 60 Hz10 ft
Impeller Diameter5.75 "
Max Solid Handling Size3 "
Wear PlateAdjustable/Replaceable Class 20/25 equivalent cast iron

منتجات مشابهة

طلمبات