6 – 8-Inch SR Series Canned Submersible Turbine 475SR75F86-0766
رقم القطعة: franklin-electric-97180475107
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: franklin-electric-97180475107
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
The SR Series submersible turbine pump is designed specifically to meet a variety of applications. With stainless steel impellers and diffusers, a stainless steel shell to maintain alignment, and heavy-investment cast stainless steel suction and discharge brackets, the SR Series submersible turbine pump is equipped to operate efficiently and handle the most demanding conditions. Features and benefits: - Stainless steel impellers and diffusers to resist corrosion. - Heavy duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than strap designs. - PTFE floating wear ring, ceramic bearing journal and Nitrile rubber fluted bearing ensure durability against wear for long-lasting performance and reliability. - Suited to operate in horizontal position. - Built-in check valve to protect the pump against water hammer. - Energy efficient hydraulic design for cost effective operation. - Space-saving compact design. - Easy to install and dismantle for service in the field if necessary. - Maximum operating temperature - 140 °F / 60 °C (304SS) and 194 °F / 90 °C (316SS).
| HP 60Hz | 75 hp |
|---|---|
| Frequency | 60 Hz |
| Continuous Duty | No |
| Flow | 475 gpm |
| Shut Off 60 Hz | 731.63 ft |
| Stages | 7 |
| Submersible Use | No |
| Temperature Rating | 140 °F |
| Impeller Material | Stainless Steel AISI 304 |
| Motor Bracket Material | Stainless Steel AISI 304 |
| Check Valve | Yes |
| Check Valve Material | Stainless Steel AISI 316 |
| Discharge Material | Stainless Steel AISI 304 |
| Intake Screen Material | Stainless Steel AISI 316 |
| Diffuser Material | Stainless Steel AISI 304 |
| Motor Fill Solution (Water Soluble / Non Toxic) | No |
| Discharge | Threaded - FNPT |
| Discharge Diameter | 6 " |
| Diameter With Cable Guard | 7.34 " |
| Product Weight | 123.5 lb |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Item # | 97180475107 |
| Model | 475SR75F86-0766 |
| Series | 8-Inch SR Series 304 Stainless Steel |
| Product family | 6 – 8-Inch SR Series Canned Submersible Turbine |
| SubTrol Heat Sensor | No |
| Cable Guard Material | Stainless Steel AISI 316 |
| Pump Length | 50.16 " |
| Maximum Allowable Amount of Sand | 100 ppm |
| Pump Efficiency | 80.0 % |
| Coupling Material | Stainless Steel AISI 431/329 1.4057/1.4460 |
| Bowl Material | 304 SS |
| Pump Shaft Material | Stainless Steel AISI 431 |
| Pump Bracket | 6 " |
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر