10-Inch Rewindable Motor 10RW-150-460-60-SD-2F-PE2

Franklin Electric

10-Inch Rewindable Motor 10RW-150-460-60-SD-2F-PE2

رقم القطعة: franklin-electric-2642355321

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The 10-inch rewindable motor, manufactured in ISO 9001 certified facilities, is built for dependable operation in 10" diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The 10-inch rewindable motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The Sand fighter SiC seal system is standard. For applications in aggressive media, motors made of 316 SS and 904 L are available. Features and benefits: - Easy to assemble with double flange - Cable material according to drinking water regulations (VDE/ACS/KTW approved) - Sand fighter SiC seal system for high performance in sand - High efficiency electrical design for low operation cost - All motors prefilled and 100% tested - Max. storage temperature 5 °F (-15 °C) to 140 °F (60 °C) - Design for retrofitable PT100 sensor - Non contaminating FES 93 filled design - NSF/ANSI 61 Certified - Other voltages - Y∆ - start (pos. of cables 90°) - Motors in complete 316 SS and 904 L - PT 100 temperature sensor (sold separately) - Lead in different lengths up to 165 ft. (50 m) - 10" Three-Phase Motors, 2-Pole, 3600 RPM - 130-185 kW / 175-250 hp - 10" flange - IP 68 protection - 10 maximum starts per hour - Vertical and horizontal installation (excluding 185 kW / 250 hp motors) - Motor Lead in 20 ft. (6 m) length - 380-415 V/50 Hz, 460 V/60 Hz, and 575 V/60 Hz standard voltages - Voltage tolerance (50 Hz): -10% / +6% UN [380-415V = (380-10%) – (415+6%)] - Voltage tolerance (60 Hz): ±10% UN - PE2/PA winding insulation for max. ambient temp. of 113 °F (45 °C) at the same cooling conditions as standard

المواصفات

HP 60Hz200 hp
Frequency50Hz/60Hz
PhasesThree-Phase
Amps - Full Load249 A
Amps - Service Factor294 A
Volts380 VAC / 460 VAC
Voltage Tolerance (%)-10.0% / +10.0%
Wire6-Wire
Thrust Bearing Rating13400 lb
Lead Length21 ft
MotorRewindable
Continuous DutyYes
Efficiency Service Factor Load [%]87.00 %
Protection [IP]IP68
Hz50Hz/60Hz
Lead Wire Size25 mm²
Poles2
S.F.1.15
Motor NEMA Frame Type10" no NEMA
Motor CoolingWater
Motor Ambient Temperature Rating Nominal113 °F
RotationCounter clockwise facing the shaft
Thrust BearingKingsbury Type
SealMechanical Seal
Lead Insulation MaterialEPR
Diaphragm MaterialEthylene-Propylene-Diene (EPDM)
Motor Fill Solution (Water Soluble / Non Toxic)Yes
Shaft Slinger MaterialEPDM
Stator/ Motor Shell Material304 SS
Winding MaterialCopper/ PE2/PA
Motor Length69.65 "
Product Weight910 lb
Product Weight with Pack1021 lb
Carton Length90.4 "
Carton Width13.4 "
Carton Height27.1 "
Shaft EndKeyed
Minimum Order Quantity1
Drinking Water Agency ApprovalsANSI/NSF Standard 61
Electrical Agency ApprovalsUL
Warranty Standard Time12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Repair Kit AvailableYes
Item #2642355321
Model10RW-150-460-60-SD-2F-PE2
Series10-Inch Three Phase Rewindable Model
Product family10-Inch Rewindable Motor
SubTrol Heat SensorNo
Motor Diameter - Physical Diameter9.25"
Motor Insulation ClassificationY
Motor Shaft End - MaterialStainless Steel 1.4460
Motor Fill SolutionFES93
Shaft Diameter1.69 "
Maximum Immersion Depth1148.29 ft
Minimum Cooling Flow1.6 ft/sec
Motor AdapterDouble flange
Motor Bottom End Bell MaterialCast Iron with E-Coat Paint
Motor Top End Bell MaterialCast Iron with E-Coat Paint
Stator Ends MaterialCarbon Steel
Stator FillWater/Propyleneglycol
TypeSand Fighter
Motor ConnectionY-Δ
Maximum Starts in a 1 Hour Period10

منتجات مشابهة

طلمبات