Franklin Electric

12-Inch Rewindable Motor 2656865021

رقم القطعة: franklin-electric-2656865021

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The 12-inch rewindable motor, manufactured in ISO 9001 certified facilities, is built for dependable operation in 12" diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The 12-inch rewindable motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. Features and benefits: - Easy to assemble with double flange - Cable material according to drinking water regulations (VDE/ACS/KTW approved) - Sand fighter SiC seal system for high performance in sand - High efficiency electrical design for low operation cost - All motors prefilled and 100% tested - Max. storage temperature 5°F (-15 °C) to 140 °F (60 °C) - Design for retrofitable PT100 sensor - Non contaminating FES 93 filled design - NSF/ANSI 61 Certified - 80 kN thrust load - Other voltages - Y∆ - start (pos. of cables 90°) - PT 100 temperature sensor (sold separately) - Special lead lengths available upon request - 316 SS construction - 12" Three-Phase Motors, 2-Pole, 3600 RPM - 185-400 kW / 250-536 hp - 12" flange - IP 68 protection - 5 maximum starts per hour - Vertical and horizontal installation - Motor Lead in 20 ft. (6 m) length - 460 V/60 Hz and 575 V/60 Hz standard voltages - Voltage tolerance (50 Hz): -10% / +6% UN [380-415V = (380-10%) – (415+6%)] - Voltage tolerance (60 Hz): ±10% UN - 30 ºC ambient temperature with a minimum cooling flow: v = 0.5 m/s

المواصفات

HP 60Hz200 hp
Frequency60 Hz
PhasesThree-Phase
Amps - Full Load312 A
Amps - Service Factor312 A
Volts460 VAC
Voltage Tolerance (%)-10.0% / +10.0%
Wire3-Wire
Thrust Bearing Rating10000 lb
Lead Length20 ft
MotorRewindable
Continuous DutyYes
Efficiency Service Factor Load [%]87.00 %
Hz60 Hz
Lead Wire Size70 mm²
Poles4
S.F.1
Motor Ambient Temperature Rating Nominal86 °F
RotationCounter clockwise facing the shaft
Thrust BearingKingsbury Type
SealMechanical Seal
Diaphragm MaterialEthylene-Propylene-Diene (EPDM)
Motor Fill Solution (Water Soluble / Non Toxic)Yes
Shaft Slinger MaterialNitrile Rubber (NBR)
Stator/ Motor Shell Material304 SS
Winding MaterialCopper/ PE2/PA
Motor Length102.2 "
Product Weight1461 lb
Product Weight with Pack1638 lb
Shaft EndKeyed
Drinking Water Agency ApprovalsANSI/NSF Standard 61
Electrical Agency ApprovalsUL
Warranty Standard Time12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Item #2656865021
Model12RW-185-460-60-DOL-3R-PE2 -4POL
Series12-Inch Rewindable 4-Pole Motor
Product family12-Inch Rewindable Motor
SubTrol Heat SensorNo
Motor Diameter - Physical Diameter11.26"
Motor Insulation ClassificationY
Motor Shaft End - MaterialStainless Steel 1.4462
Motor Fill SolutionFES93
Minimum Cooling Flow1.6 ft/sec
Motor AdapterDouble flange
Motor Bottom End Bell MaterialCast Iron with E-Coat Paint
Motor Top End Bell MaterialCast Iron with E-Coat Paint
Stator Ends MaterialCarbon Steel
Stator FillWater/Propyleneglycol
TypeSand Fighter
Motor ConnectionDOL

منتجات مشابهة

طلمبات