4-Inch Encapsulated Motor 2243501903GS

Franklin Electric

4-Inch Encapsulated Motor 2243501903GS

رقم القطعة: franklin-electric-2243501903gs

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The Franklin 4-inch Super Stainless motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers 4-inch motors in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor. The Franklin Electric Stainless Super 4-inch submersible motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers a 4-inch submersible motor in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.

المواصفات

HP 60Hz1.5 hp
Frequency50 Hz
PhasesSingle-Phase
Amps - Full Load10 A
Amps - Service Factor10 A
Volts220 VAC
Voltage Tolerance (%)-10.0% / +10.0%
Wire3-Wire
Thrust Bearing Rating650 lb
Lead Length4 ft
MotorSubmersible
Continuous DutyYes
Efficiency Service Factor Load [%]67.00 %
Hz50 Hz
Lead Wire SizeAWG #14
Lead Retainer MethodLead Jam Nut
Motor Efficiency69.0
Poles2
Service Factor - 50Hz1
Motor CoolingWater
Motor Ambient Temperature Rating Nominal86 °F
RotationCounter clockwise facing the shaft
Thrust BearingKingsbury Type
SealLip Seal Ring
Lead Insulation MaterialXLPE
Diaphragm MaterialNitrile Rubber (NBR)
Motor Construction DesignSuper Stainless
Motor Fill Solution (Water Soluble / Non Toxic)Yes
Shaft Slinger MaterialNitrile Rubber (NBR)
Stator/ Motor Shell MaterialStainless Steel
Winding MaterialCopper
Motor Length13.66 "
Product Weight28 lb
Product Weight with Pack28.5 lb
Carton Length21.25 "
Carton Width4.25 "
Carton Height4.38 "
Shaft EndSpline
Drinking Water Agency ApprovalsANSI/NSF Standard 61
Electrical Agency ApprovalsUL
Warranty Standard Time12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
ApplicationsThese motors are built for dependable operation in 4” diameter or larger water wells.
Item #2243501903GS
Model3W,1.5,220,50,W
Series3-Wire Single Phase Models
Product family4-Inch Encapsulated Motor
Motor Diameter - Physical Diameter3.75"
Motor Insulation ClassificationB
Motor Fill SolutionWater + Propylene Glycol
HP 50Hz1.5 hp
Minimum Cooling Flow>0.00 ft/sec
Motor Top End Bell Material304SS Cover painted cast iron
Stator FillResin
TypeWater Well
LeadNo

منتجات مشابهة

طلمبات