4-Inch Encapsulated Motor 2347288802G
رقم القطعة: franklin-electric-2347288802g
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
Franklin Electric 4" encapsulated submersible motors, built in ISO 9001 certified facilities for outstanding performance in 4" or larger water wells. The 1-phase PSC motor has been electrically optimized to offer reliable pump starting over a wide range of incoming voltages. It should ideally be combined to the Franklin Electric SubStart/SubTronicSC control boxes for maximum system performance, protection and warranty. The Franklin Electric Stainless Super 4-inch submersible motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers a 4-inch submersible motor in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.
المواصفات
| HP 60Hz | 7.5 hp |
|---|---|
| Frequency | 50Hz/60Hz |
| Phases | Three-Phase |
| Amps - Full Load | 10.9 A |
| Amps - Service Factor | 12.4 A |
| Volts | 380 VAC / 400 VAC / 415 VAC / 460 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 1500 lb |
| Lead Length | 8.33 ft |
| Motor | Submersible |
| Continuous Duty | Yes |
| Hz | 50Hz/60Hz |
| Lead Wire Size | AWG #14 |
| Lead Retainer Method | Clamp Style |
| Poles | 2 |
| S.F. | 1.15 |
| Service Factor - 50Hz | 1 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Rotation | Counter clockwise facing the shaft |
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator/ Motor Shell Material | Stainless Steel |
| Winding Material | Copper |
| Motor Length | 29.18 " |
| Product Weight | 71 lb |
| Product Weight with Pack | 71.5 lb |
| Carton Length | 33.75 " |
| Carton Width | 6.5 " |
| Carton Height | 6.25 " |
| Shaft End | Spline |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Applications | These motors are built for dependable operation in 4” diameter or larger water wells. |
| Item # | 2347288802G |
| Model | 4C3F(7.5HP,460/380,6/5,SF) |
| Series | Three Phase Models |
| Product family | 4-Inch Encapsulated Motor |
| Motor Diameter - Physical Diameter | 3.75" |
| Motor Insulation Classification | B |
| Motor Fill Solution | Water + Propylene Glycol |
| HP 50Hz | 7.5 hp |
| Motor Top End Bell Material | Stainless Steel |
| Stator Fill | Resin |
| Type | Sand Fighter |
| Lead | Yes |
منتجات مشابهة
طلمباتFranklin Electric
4-Inch Encapsulated Motor 2347488802G
اطلب عرض سعر
Franklin Electric
4-Inch Encapsulated Motor 2347388802G
اطلب عرض سعر
Franklin Electric
4-Inch Encapsulated Motor 2347188802G
اطلب عرض سعر
Franklin Electric
4-Inch Encapsulated Motor 2347088502G
اطلب عرض سعر
Franklin Electric
4-Inch Encapsulated Motor 2347088802G
اطلب عرض سعر
Franklin Electric
4-Inch Encapsulated Motor 2347188502G
اطلب عرض سعر
Franklin Electric
4-Inch Encapsulated Motor 2347388602G
اطلب عرض سعر
Franklin Electric
4-Inch Encapsulated Motor 2347288502G
اطلب عرض سعر