6-Inch Encapsulated DR56 Dual-Rated Motor 2760096262

Name: 6-Inch Encapsulated DR56 Dual-Rated Motor 2760096262
Brand: Franklin Electric
SKU: franklin-electric-2760096262

رقم القطعة: franklin-electric-2760096262

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Pumping applications are rapidly changing - and Franklin's DR56 motor was designed and built in response to many requests for a motor that can operate effectively under these evolving application demands. The DR56 6 inch motor utilizes our premium encapsulation process to allow continuous operation in water temperatures of up to 50 °C (provided minimum allowable rates of flow past the motor are maintained). Franklin's DR56 is the right choice for your demanding, high temperature 6 inch well applications. Pumping applications are rapidly changing - and Franklin's DR56 6-inch dual-rated-motor was designed and built in response to many requests for a motor that can operate effectively under these evolving application demands. The DR56 6-inch dual-rated-motor utilizes our premium encapsulation process to allow continuous operation in water temperatures of up to 50 °C (provided minimum allowable rates of flow past the motor are maintained). Franklin's DR56 is the right choice for your demanding, high temperature 6 inch well applications.

المواصفات

HP 60Hz	60 hp
Frequency	50Hz/60Hz
Phases	Three-Phase
Amps - Full Load	81 A
Amps - Service Factor	92.3 A
Volts	380 VAC / 460 VAC
Voltage Tolerance (%)	-10.0% / +10.0%
Wire	3-Wire
Thrust Bearing Rating	10000 lb
Lead Length	13 ft
Motor	Encapsulated
Continuous Duty	Yes
Efficiency Service Factor Load [%]	84.00 %
Protection [IP]	IP68
Hz	50Hz/60Hz
Lead Wire Size	AWG #8
Lead Retainer Method	Lead Jam Nut
Poles	2
S.F.	1.15
Motor Cooling	Water
Motor Ambient Temperature Rating Nominal	122 °F
Rotation	Counter clockwise facing the shaft
Winding Resistance (Main Winding)	.22-.27
Thrust Bearing	Kingsbury Type
Seal	Mechanical Seal
Lead Insulation Material	Overmolded
Diaphragm Material	Fluoroelastomers FKM
Motor Fill Solution (Water Soluble / Non Toxic)	Yes
Shaft Slinger Material	Nitrile Rubber (NBR)
Stator/ Motor Shell Material	300 Series SS
Winding Material	Copper
Motor Length	64.2 "
Product Weight	302 lb
Product Weight with Pack	330 lb
Carton Length	71.75 "
Carton Width	8.75 "
Carton Height	10.5 "
Shaft End	Spline
Drinking Water Agency Approvals	ANSI/NSF Standard 61
Electrical Agency Approvals	UL
Warranty Standard Time	12 Month Install / 24 Month Manufacturing
Repair Kit Available	Yes
Item #	2760096262
Model	6H3F(60/50HP,460/380,6/5,W)XXL
Series	6-Inch DR56 Three Phase Dual-Rated Motor
Product family	6-Inch Encapsulated DR56 Dual-Rated Motor
SubTrol Heat Sensor	Yes
Motor Diameter - Physical Diameter	5.44"
Motor Insulation Classification	F
Motor Shaft End - Material	17-4SS
Seal Material	Silicon Carbide / Silicon Carbide
Motor Fill Solution	FES92
Shaft Diameter	1 "
Minimum Cooling Flow	.50 ft/sec
Motor Adapter	Double flange
Motor Bottom End Bell Material	Cast Iron with E-Coat Paint
Motor Top End Bell Material	Cast Iron with E-Coat Paint
Stator Ends Material	Carbon Steel
Stator Fill	Resin
Type	Sand Fighter
Motor Connection	DOL