6-Inch Encapsulated High-Temp Motor 2766113003
رقم القطعة: franklin-electric-2766113003
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
The 6-inch High-Temp Motor utilizes a distinctive premium encapsulation process and water-soluble coolant to allow dependable, continuous operation in 6" diameter or larger water wells with water temperatures up to 90 ºC (provided minimum allowable flow rates past the motor are maintained). This submersible motor is powered by design and can handle thrust loads 25% higher than a standard motor without oil. Its superior construction comes with water-lubricated radial and thrust bearings to benefit from a maintenance-free operation. Demanding pumping applications have higher requirements. That’s why Franklin’s Hi-Temp Submersible Motors are engineered and tested to deliver exceptional performance in challenging, high-temperature well applications and/or low-flow conditions. The 6-inch High-Temp Motor utilizes a distinctive premium encapsulation process and water-soluble coolant to allow dependable, continuous operation in 6" diameter or larger water wells with water temperatures up to 90 ºC (provided minimum allowable flow rates past the motor are maintained). This submersible motor is powered by design and can handle thrust loads 25% higher than a standard motor without oil. Its superior construction comes with water-lubricated radial and thrust bearings to benefit from a maintenance-free operation. Features and benefits: - Up to 194 °F (90 °C) ambient temperature - 100% increase in upthrust capability at 30 °C - 25% increase in downthrust capability at 30 °C - Wet Well, Reservoir, Low Flow approved in 12” diameter or larger wells with ambient water up to 87 °F (30 °C) - High temperature leads - Hermetically sealed stator - Innovative high temperature winding encapsulation system - FES92 exclusive water soluble, high temperature bearing lubrication - Double-flange NEMA mounting for ease of handling and pump mounting - Stainless steel splined shaft for maximum shaft/coupling contact - Full 3450 RPM 60Hz design point for superior pump performance - Sand Fighter Sealing System - Franklin Electric’s exclusive Water-Bloc lead connection - 316 SS and Y-∆ - consult factory - Extended warranty available when used with FE Submonitor overload protection
المواصفات
| HP 60Hz | 7.5 hp |
|---|---|
| Frequency | 50Hz/60Hz |
| Phases | Three-Phase |
| Amps - Full Load | 10.8 A |
| Amps - Service Factor | 12.3 A |
| Volts | 380 VAC / 460 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 3500 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 80.00 % |
| Protection [IP] | IP68 |
| Hz | 50Hz/60Hz |
| Lead Wire Size | AWG #8 |
| Lead Retainer Method | Lead Jam Nut |
| Poles | 2 |
| S.F. | 1.15 |
| Motor Cooling | Water |
| Motor Ambient Temperature Rating Nominal | 194 °F |
| Rotation | Counter clockwise facing the shaft |
| Winding Resistance (Main Winding) | 2.4-2.9 |
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Lead Insulation Material | Overmolded |
| Diaphragm Material | Fluoroelastomers FKM |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | Fluoroelastomers (FKM) |
| Stator/ Motor Shell Material | 316 SS |
| Winding Material | Copper |
| Motor Length | 26.9 " |
| Product Weight | 96 lb |
| Product Weight with Pack | 110 lb |
| Carton Length | 34.5 " |
| Carton Width | 7.25 " |
| Carton Height | 10.5 " |
| Shaft End | Spline |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Repair Kit Available | Yes |
| Item # | 2766113003 |
| Model | 6H3F(7.5HP,460/380,6/5,S) |
| Series | 6-Inch Three Phase High-Temp Models |
| Product family | 6-Inch Encapsulated High-Temp Motor |
| SubTrol Heat Sensor | No |
| Motor Diameter - Physical Diameter | 5.44" |
| Motor Insulation Classification | F |
| Motor Shaft End - Material | 17-4SS |
| Seal Material | Silicon Carbide / Silicon Carbide |
| Motor Fill Solution | FES92 |
| Shaft Diameter | 1 " |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Adapter | Double flange |
| Motor Bottom End Bell Material | 316 SS |
| Motor Top End Bell Material | 316 SS |
| Stator Ends Material | 316 SS |
| Stator Fill | Resin |
| Type | 316 SS |
| Motor Connection | DOL |
منتجات مشابهة
طلمباتFranklin Electric
6-Inch Encapsulated High-Temp Motor 2766013003
اطلب عرض سعر
Franklin Electric
6-Inch Encapsulated High-Temp Motor 2766120003
اطلب عرض سعر
Franklin Electric
6-Inch Encapsulated High-Temp Motor 2766110003
اطلب عرض سعر
Franklin Electric
6-Inch Encapsulated High-Temp Motor 2766023003
اطلب عرض سعر
Franklin Electric
6-Inch Encapsulated High-Temp Motor 2766103003
اطلب عرض سعر
Franklin Electric
6-Inch Encapsulated High-Temp Motor 2766123003
اطلب عرض سعر
Franklin Electric
6-Inch Encapsulated High-Temp Motor 2766003003
اطلب عرض سعر
Franklin Electric
6-Inch Encapsulated High-Temp Motor 2766130003
اطلب عرض سعر