6-Inch Encapsulated Motor 2366274025
رقم القطعة: franklin-electric-2366274025
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: franklin-electric-2366274025
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
Franklin's 6-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. These motors provide large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime. Franklin’s 6-inch submersible motor is typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. This 6-inch submersible motor provides large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.
| HP 60Hz | 40 hp |
|---|---|
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps - Full Load | 42.8 A |
| Amps - Service Factor | 49.6 A |
| Volts | 575 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 6000 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 83.00 % |
| Protection [IP] | IP68 |
| Hz | 60 Hz |
| Lead Wire Size | AWG #8 |
| Lead Retainer Method | Lead Jam Nut |
| Poles | 2 |
| S.F. | 1.15 |
| Motor Cooling | Water |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Rotation | Counter clockwise facing the shaft |
| Winding Resistance (Main Winding) | .52-.64 |
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Lead Insulation Material | Overmolded |
| Diaphragm Material | Fluoroelastomers FKM |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator/ Motor Shell Material | 316 SS |
| Winding Material | Copper |
| Motor Length | 43.7 " |
| Product Weight | 192 lb |
| Product Weight with Pack | 206 lb |
| Carton Length | 47.25 " |
| Carton Width | 7.25 " |
| Carton Height | 10.5 " |
| Shaft End | Spline |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Repair Kit Available | Yes |
| Item # | 2366274025 |
| Model | 6C3F(40HP,575,60,S) 6C3F(30KW,575,6,S)L0 |
| Series | Three Phase Models |
| Product family | 6-Inch Encapsulated Motor |
| SubTrol Heat Sensor | Yes |
| Motor Diameter - Physical Diameter | 5.44" |
| Motor Insulation Classification | F |
| Motor Shaft End - Material | 17-4SS |
| Seal Material | Silicon Carbide / Silicon Carbide |
| Motor Fill Solution | FES91 |
| Shaft Diameter | 1 " |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Adapter | Double flange |
| Motor Bottom End Bell Material | 316 SS |
| Motor Top End Bell Material | 316 SS |
| Stator Ends Material | 316 SS |
| Stator Fill | Resin |
| Type | 316 SS |
| Motor Connection | DOL |
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر