8-Inch Encapsulated Motor 2396146241
رقم القطعة: franklin-electric-2396146241
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
Franklin’s 8-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. Franklin’s 8-inch submersible motor is typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. This 8-inch submersible motor provides large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.
المواصفات
| HP 60Hz | 100 hp |
|---|---|
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps - Full Load | 101 A |
| Amps - Service Factor | 114 A |
| Volts | 575 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 10000 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 89.00 % |
| Protection [IP] | IP68 |
| Hz | 60 Hz |
| Lead Wire Size | AWG #4 |
| Poles | 2 |
| S.F. | 1.15 |
| Motor Cooling | Water |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Rotation | Counter clockwise facing the shaft |
| Winding Resistance (Main Winding) | .11-.13 |
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Lead Insulation Material | XLPE |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator/ Motor Shell Material | 316 SS |
| Winding Material | Copper |
| Motor Length | 57.3 " |
| Product Weight | 527 lb |
| Product Weight with Pack | 585 lb |
| Carton Length | 67 " |
| Carton Width | 9 " |
| Carton Height | 17 " |
| Shaft End | Spline |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Repair Kit Available | Yes |
| Item # | 2396146241 |
| Model | 8C3F(100HP,575,6,S) |
| Series | 8-Inch Three Phase Models |
| Product family | 8-Inch Encapsulated Motor |
| SubTrol Heat Sensor | Yes |
| Motor Diameter - Physical Diameter | 7.70" |
| Motor Insulation Classification | F |
| Motor Shaft End - Material | 17-4SS |
| Motor Fill Solution | FES91 |
| Shaft Diameter | 1.5 " |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Adapter | Double flange |
| Motor Bottom End Bell Material | 316 SS |
| Motor Top End Bell Material | 316 SS |
| Stator Ends Material | 316 SS |
| Stator Fill | Resin |
| Type | 316 SS |
| Motor Connection | DOL |
منتجات مشابهة
طلمباتFranklin Electric
8-Inch Encapsulated Motor 2396046241
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391058504
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2396148541
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391158504
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2396248641
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391056204
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2396048541
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391156204
اطلب عرض سعر