8-Inch Encapsulated Motor 2391076204
رقم القطعة: franklin-electric-2391076204
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
Franklin’s 8-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. Franklin’s 8-inch submersible motor is typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. This 8-inch submersible motor provides large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.
المواصفات
| HP 60Hz | 175 hp |
|---|---|
| Frequency | 50Hz/60Hz |
| Phases | Three-Phase |
| Amps - Full Load | 219 A |
| Amps - Service Factor | 249 A |
| Volts | 380 VAC / 460 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 10000 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 88.00 % |
| Protection [IP] | IP68 |
| Hz | 50Hz/60Hz |
| Lead Wire Size | AWG #2 |
| Poles | 2 |
| S.F. | 1.15 |
| Motor Cooling | Water |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Rotation | Counter clockwise facing the shaft |
| Winding Resistance (Main Winding) | .04-.05 |
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Lead Insulation Material | XLPE |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator/ Motor Shell Material | 316 SS |
| Winding Material | Copper |
| Motor Length | 85.8 " |
| Product Weight | 837 lb |
| Product Weight with Pack | 925 lb |
| Carton Length | 96 " |
| Carton Width | 9 " |
| Carton Height | 17 " |
| Shaft End | Spline |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Repair Kit Available | Yes |
| Item # | 2391076204 |
| Model | 8C3F(175HP,460/380,6/5,S) |
| Series | 8-Inch Three Phase Models |
| Product family | 8-Inch Encapsulated Motor |
| SubTrol Heat Sensor | Yes |
| Motor Diameter - Physical Diameter | 7.70" |
| Motor Insulation Classification | F |
| Motor Shaft End - Material | 17-4SS |
| Motor Fill Solution | FES91 |
| Shaft Diameter | 1.5 " |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Adapter | Double flange |
| Motor Bottom End Bell Material | 316 SS |
| Motor Top End Bell Material | 316 SS |
| Stator Ends Material | 316 SS |
| Stator Fill | Resin |
| Type | 316 SS |
| Motor Connection | DOL |
منتجات مشابهة
طلمباتFranklin Electric
8-Inch Encapsulated Motor 2391178504
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391088504
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391078504
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391188504
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391166204
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391086204
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391066204
اطلب عرض سعر
Franklin Electric
8-Inch Rewindable MagForce High Efficiency Motor 8PM-75-460-120-DOL-1F-PE2
اطلب عرض سعر