8-Inch Rewindable MagForce High Efficiency Motor 2630185331
رقم القطعة: franklin-electric-2630185331
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
Get the streamlined solution needed for pumping power at maximum efficiency: MagForce High Efficiency Motors are engineered for high performance, simple startup, and incredible long-term cost savings. Owners and operators benefit from electrical cost savings as a result of a 93% efficiency rating in the motor for an investment payback of fewer than two years in typical duty rate systems*. *Results based on field trial data Each MagForce High Efficiency Motor is powered by permanent magnet technology that enables operation at a fraction of the energy consumption when compared to traditional induction designs. When optimized and paired with an innovative Franklin Electric engineered drive, users benefit from intuitive startup and reliable protection for submersible pumping applications. Features and benefits: - Powered by MagForce High Efficiency Motor with up to 93% efficiency rating that is 5-6 points (7%) greater than standard induction motor construction. Typical duty rate systems can have a payback* of 1 to 2 years. - Up to 14% energy savings* compared to traditional induction motors. - Available motor options cover a wide range of pump horsepower needs (up to 175 hp) with fewer SKUs to manage. - Lighter and easier to handle than standard induction motors. - When optimized and paired with a Franklin Electric variable frequency drive, expect easy startups and reliable protection for any project. - Rely on components from a single trusted source for the ultimate in operational compatibility and optimized operation. - Comes fully supported by the industry’s leading Technical Support professionals and Field Service Engineers. - *Field trial data. - Groundwater remediation - Drainage water level control - Municipal/Utility water supply - Construction site dewatering - High volume and industrial livestock operations - Mine site dewatering and tank level control - Well supply geothermal HVAC systems - Sand Fighter models are equipped with Franklin’s robust Sand Fighter sealing system for durability against sand or other abrasives. - Max 3600 rpm (4 pole, 120 Hz); Nominal 3450 rpm (4 pole, 115 Hz) Maximum temperature winding wire NEMA class 200 - Standard rewindable motor with PE2/PA winding insulation - 8” double flange NEMA mounting design - All motors with factory installed leads, motor lead length: 19 ft - Stainless steel shell - Liquid lubricated radial bearings and high capacity Kingsbury type 10,000 lb thrust bearing for 100% maintenance-free operation - Pressure-equalizing diaphragm, spring pre-loaded - Sand slinger - Nominal ambient temperature: 86°F with 1.5 ft/s cooling flow - Stainless steel splined shaft - Max. storage temperature: 5°F to 140°F - System Supply Voltage: 460/575 V (120 Hz) - Voltage Tolerance: ± 10 % UN - Frequency of starts: 10 starts/hour (with min. 3 minutes resting time), equally distributed - Motor ingress protection IP68 - NSF/ANSI 61 Certified - Motor installation orientation: Vertical / horizontal (shaft end heightened) - Rotation counterclockwise facing shaft end (rotation reversible)
المواصفات
| Frequency | 120 Hz |
|---|---|
| Phases | Three-Phase |
| Amps - Full Load | 180 A |
| Amps - Service Factor | 216 A |
| Volts | 460 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 10000 lb |
| Lead Length | 21 ft |
| Motor | Rewindable |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 92.60 % |
| Hz | 120 Hz |
| Lead Wire Size | 35 mm² |
| Poles | 4 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Rotation | Counter clockwise facing the shaft |
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Diaphragm Material | Ethylene-Propylene-Diene (EPDM) |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | EPDM |
| Stator/ Motor Shell Material | 304 SS |
| Winding Material | Copper/ PE2/PA |
| Motor Length | 58.35 " |
| Product Weight | 452 lb |
| Product Weight with Pack | 520 lb |
| Shaft End | Spline |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Item # | 2630185331 |
| Model | 8PM-130-460-120-DOL-3RD-PE2 INNER GROUND |
| Series | 8-Inch MagForce High-Efficiency Motor |
| Product family | 8-Inch Rewindable MagForce High Efficiency Motor |
| SubTrol Heat Sensor | No |
| HP 120Hz | 150-175 hp |
| Motor Diameter - Physical Diameter | 7.70" |
| Motor Insulation Classification | Y |
| Motor Shaft End - Material | Stainless Steel 1.4462 |
| Motor Fill Solution | FES93 |
| Service Factor - 120Hz | 1.15 |
| VFD Required | YES |
| Minimum Cooling Flow | 1.5 ft/sec |
| Motor Adapter | Double flange |
| Motor Bottom End Bell Material | Cast Iron with E-Coat Paint |
| Motor Top End Bell Material | Cast Iron with E-Coat Paint |
| Stator Ends Material | Carbon Steel |
| Stator Fill | Water/Propyleneglycol |
| Type | Sand Fighter |
منتجات مشابهة
طلمباتFranklin Electric
8-Inch Rewindable MagForce High Efficiency Motor 8PM-93-460-120-DOL-1R-PE2
اطلب عرض سعر
Franklin Electric
8x6-Inch Encapsulated Submersible Motor 2390006121
اطلب عرض سعر
Franklin Electric
8-Inch Rewindable MagForce High Efficiency Motor 8PM-75-460-120-DOL-1F-PE2
اطلب عرض سعر
Franklin Electric
8x6-Inch Encapsulated Submersible Motor 2390016121
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391086204
اطلب عرض سعر
Franklin Electric
8x6-Inch Encapsulated Submersible Motor 2390026121
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391188504
اطلب عرض سعر
Franklin Electric
8-Inch Encapsulated Motor 2391088504
اطلب عرض سعر