FPS 3200 Series Submersible Well Pump 10FRD05P4-3W230

Franklin Electric

FPS 3200 Series Submersible Well Pump 10FRD05P4-3W230

رقم القطعة: franklin-electric-96211035

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4-inch motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4-inch well. The 3200 Series also offers a hydraulic stage design optimized for greater water and pressure output when installed at deeper well depths. The FPS 3200 Series is a submersible well pump and is designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4-inch motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4-inch well. The FPS 3200 Series submersible well pump also offers a hydraulic stage design optimized for greater water and pressure output when installed at deeper well depths. Features and benefits: - Pump diameter is smaller than a standard 4-inch submersible for easier installation in reduced diameter 4-inch wells. - Hex rubber bearing and ceramic shaft sleeve allows sand and abrasives to pass through, virtually eliminating shaft wear and upper bearing failures. - Improved hydraulic performance for deeper set depths at all horsepower and flow ratings. Floating stage design allows for maximum efficiency while minimizing the downthrust load that is transferred to the motor. - Modified PPO diffuser and disc with 300 Series stainless steel thrust and eye seal protection for durability and abrasion resistance. - Acetal impeller provides high performance to increase pressure output while reducing system losses from friction. - Removable spring-loaded check valve. - Stainless steel pump intake screen and stainless steel cable guard. - Maximum water temperature: 120 °F / 49 °C. - Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection.

المواصفات

HP 60Hz1/2 hp
Frequency60 Hz
PhasesSingle-Phase
Amps - Service Factor6 A
Volts230 VAC
Voltage Tolerance (%)-10.0% / +10.0%
Wire3-Wire
MotorEncapsulated
Continuous DutyYes
Efficiency Service Factor Load [%]60.00 %
Input PhaseSingle-Phase
Lead Retainer MethodLead Jam Nut
Flow10 gpm
Shut Off 60 Hz353 ft
Stages11
Motor Ambient Temperature Rating Nominal86 °F
Maximum Fluid Temperature120 °F
Pump Body MaterialAISI 304 Stainless Steel
Impeller MaterialAcetal
Motor Bracket MaterialThermoplastic
Check ValveYes
Discharge MaterialThermoplastic
Intake Screen MaterialThermoplastic
Thrust BearingKingsbury Type
Lead Insulation MaterialXLPE
Diffuser MaterialNoryl with 30% Fiberglass
DischargeThreaded - FNPT
Discharge Diameter1.25 "
Diameter With Cable Guard3.75 "
Motor Length9.51 "
Product Weight27 lb
Pump Diameter3.9 "
Component Motor Part Number2145059004 GS
Component Pump Part Number96221000
Drinking Water Agency ApprovalsANSI/NSF Standard 61
Electrical Agency ApprovalsUL 778
Warranty Standard Time12 Month Install / 24 Month Manufacturing
ApplicationsGroundwater pumping in clean water well systems ideal for tight well applications 4" and greater
Item #96211035
Model10FRD05P4-3W230
Series3-Wire Thermoplastic Pumps
Product familyFPS 3200 Series Submersible Well Pump
Cable Guard MaterialThermoplastic
Pump Length16.7 "
Product Length26.2 "
Maximum Flow Rate - 60 Hz11 gpm
Minimum Flow Rate - 60 Hz6 gpm
Minimum Cooling Flow.25 ft/sec
Component Control Box Part Number2801054915

منتجات مشابهة

طلمبات