J-Class 3200 Series Submersible Well Pump 7JR05P4-2W115

Franklin Electric

J-Class 3200 Series Submersible Well Pump 7JR05P4-2W115

رقم القطعة: franklin-electric-96230705

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The J-Class 3200 Series submersible well pump is designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4-inch motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4-inch well. The J-Class 3200 Series submersible well pump also offers a hydraulic stage design optimized for greater water and pressure output when installed at deeper well depths. Features and benefits: - Pump diameter is smaller than a standard 4-inch submersible for easier installation in reduced diameter 4-inch wells. - Hex rubber bearing and ceramic shaft sleeve allows sand and abrasives to pass through, virtually eliminating shaft wear and upper bearing failures. - Improved hydraulic performance for deeper set depths at all horsepower and flow ratings. Floating stage design allows for maximum efficiency while minimizing the downthrust load that is transferred to the motor. - Modified PPO diffuser and disc with 300 Series stainless steel thrust and eye seal protection for durability and abrasion resistance - Acetal impeller provides high performance to increase pressure output while reducing system losses from friction. - Removable spring-loaded check valve. - Stainless steel pump intake screen and stainless steel cable guard. - Maximum water temperature: 120 °F / 49 °C. Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection.

المواصفات

HP 60Hz1/2 hp
Frequency60 Hz
PhasesSingle-Phase
Amps - Service Factor12 A
Volts115 VAC
Voltage Tolerance (%)-10.0% / +10.0%
Wire2-Wire
MotorEncapsulated
Continuous DutyYes
Efficiency Service Factor Load [%]60.00 %
Lead Retainer MethodLead Jam Nut
Flow7 gpm
Shut Off 60 Hz324 ft
Stages10
Motor Ambient Temperature Rating Nominal86 °F
Maximum Fluid Temperature120 °F
Pump Body MaterialAISI 304 Stainless Steel
Impeller MaterialAcetal
Motor Bracket MaterialThermoplastic
Check ValveYes
Discharge MaterialThermoplastic
Intake Screen MaterialStainless Steel
Thrust BearingKingsbury Type
Lead Insulation MaterialXLPE
DischargeThreaded - FNPT
Discharge Diameter1.25 "
Diameter With Cable Guard3.75 "
Motor Length9.53 "
Product Weight26 lb
Component Motor Part Number2445049004 GS
Component Pump Part Number96220700
Drinking Water Agency ApprovalsANSI/NSF Standard 61
Warranty Standard Time12 Month Install / 24 Month Manufacturing
ApplicationsGroundwater pumping in clean water well systems ideal for tight well applications 4" and greater
Item #96230705
Model7JR05P4-2W115
Series2-Wire Thermoplastic Pumps
Product familyJ-Class 3200 Series Submersible Well Pump
Cable Guard MaterialThermoplastic
Pump Length15.9 "
Product Length25.4 "

منتجات مشابهة

طلمبات