FPS Series V Submersible Well Pump 15FV15P4-3W230

Franklin Electric

FPS Series V Submersible Well Pump 15FV15P4-3W230

رقم القطعة: franklin-electric-95401550

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The standard FPS Series V submersible well pump features unique hydraulics that improve efficiency and minimize wear even when pumping abrasives. Discharge and motor brackets are available in thermoplastic or stainless steel with a removable check valve system. This submersible well pump series is available in 5, 7, 10, 15, 20, and 25 gpm, 1/2 - 5 horsepower. Features and benefits: - 6 performance ranges: 5, 7, 10, 15, 20, and 25 gpm. - Horsepower ranges: 1/2 - 5. - Discharge head and motor bracket produced with industry proven, engineered materials. - Available in 300 series stainless steel or high quality thermoplastic resins. - Large wrench flat area on the discharge head for ease of installation. - Dry run designed top bearing positively supports the 300 series stainless steel 7/16-inch hex shaft. - Removable internal check valve. - Powered by Franklin Electric corrosion-resistant super stainless 4-inch submersible motors with lightning protection. - Maximum water temperature with proper flow is 120 °F/49 °C. Consult factory for details.

المواصفات

HP 60Hz1.5 hp
Frequency60 Hz
PhasesSingle-Phase
Amps - Service Factor11.5 A
Volts230 VAC
Voltage Tolerance (%)-10.0% / +10.0%
Wire3-Wire
MotorEncapsulated
Continuous DutyYes
Efficiency Service Factor Load [%]73.00 %
Lead Retainer MethodLead Jam Nut
Flow15 gpm
Shut Off 60 Hz467 ft
Stages11
Motor Ambient Temperature Rating Nominal86 °F
Maximum Fluid Temperature120 °F
Pump Body MaterialAISI 304 Stainless Steel
Impeller MaterialAcetal
Motor Bracket MaterialThermoplastic
Check ValveYes
Discharge MaterialThermoplastic
Intake Screen MaterialThermoplastic
Thrust BearingKingsbury Type
Lead Insulation MaterialXLPE
DischargeThreaded - FNPT
Discharge Diameter1.25 "
Diameter With Cable Guard3.9 "
Motor Length13.66 "
Product Weight37 lb
Component Motor Part Number2243009203 GS
Component Pump Part Number95411503
Drinking Water Agency ApprovalsANSI/NSF Standard 61
Warranty Standard Time12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
ApplicationsGroundwater pumping in clean water well systems 4" diameter and greater
Item #95401550
Model15FV15P4-3W230
Series3-Wire Thermoplastic Pumps
Product familyFPS Series V Submersible Well Pump
Cable Guard MaterialThermoplastic
Pump Length17.44 "
Product Length31.04 "
Component Control Box Part Number2823008110

منتجات مشابهة

طلمبات