FPS TRI-SEAL Submersible Well Pump 15FA1S4-PE
رقم القطعة: franklin-electric-93821515
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: franklin-electric-93821515
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
The standard FPS Tri-Seal 4-inch submersible well pump features the new TRI-SEAL floating stage system. This new stage system for the submersible well pump improves efficiency and protects against wear when pumping abrasives (sand). Features and benefits: - 300 series stainless steel hub floats with the impeller maintaining a positive seal. - Phenolic washer provides down-thrust protection. - Acetal impeller provides high efficiency performance and abrasion resistance. - Modified PPO diffuser and disc - proven abrasion resistant material. - Floating stage design allows impeller to float independently. Removable, spring-loaded check valve. - Maximum water temperature: 120 °F/ 49 °C. - Ceramic shaft sleeve and rubber discharge bearing protect shaft and eliminate sand wear. - Powered by Franklin Electric corrosion resistant 4-inch submersible motor - Patented impeller hub seal system seals radially and axially to prevent fluid recirculation, providing high performance in the harshest conditions.
| HP 60Hz | 1 hp |
|---|---|
| Frequency | 60 Hz |
| Phases | Not Applicable |
| Volts | Not Applicable |
| Motor | Encapsulated |
| Input Phase | Not Applicable |
| Flow | 15 gpm |
| Shut Off | 343 ft |
| Shut Off 60 Hz | 343 ft |
| Stages | 9 |
| Maximum Fluid Temperature | 120 °F |
| Pump Body Material | AISI 304 Stainless Steel |
| Discharge Head Material | Stainless Steel |
| Impeller Material | Acetal |
| Motor Bracket Material | Stainless Steel |
| Check Valve | Yes |
| Intake Screen Material | Stainless Steel |
| Diffuser Material | Noryl with 30% Fiberglass |
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Diameter With Cable Guard | 3.9 " |
| Product Weight | 10 lb |
| Pump Diameter | 3.9 " |
| Component Pump Part Number | 93821515 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Item # | 93821515 |
| Model | 15FA1S4-PE |
| Series | Stainless Steel Pump Ends |
| Product family | FPS TRI-SEAL Submersible Well Pump |
| Cable Guard Material | Stainless Steel |
| Pump Length | 14.14 " |
| Maximum Flow Rate - 60 Hz | 18 gpm |
| Minimum Flow Rate - 60 Hz | 8 gpm |
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر