J-Class TRI-SEAL Submersible Well Pump 15JS1P4-3W230
رقم القطعة: franklin-electric-93741545
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: franklin-electric-93741545
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
The standard J-Class Tri-Seal 4-inch submersible pump features the Tri-Seal floating stage system. This stage system further improves efficiency and protects against wear when pumping abrasives (sand). Features and benefits: - 300 series stainless steel hub floats with the impeller maintaining a positive seal. - Phenolic washer provides down-thrust protection. - Acetal impeller provides high efficiency performance and abrasion resistance. - Modified PPO diffuser and disc - proven abrasion resistant material. - Floating stage design allows impeller to float independently. Removable, spring-loaded check valve. - Maximum water temperature: 120 °F/ 49 °C. - Ceramic shaft sleeve and rubber discharge bearing protect shaft and eliminate sand wear. - Powered by Franklin Electric corrosion resistant 4-inch submersible motor - Patented impeller hub seal system seals radially and axially to prevent fluid recirculation, providing high performance in the harshest conditions.
| HP 60Hz | 1 hp |
|---|---|
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Service Factor | 10.4 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 64.00 % |
| Lead Retainer Method | Lead Jam Nut |
| Flow | 15 gpm |
| Shut Off 60 Hz | 343 ft |
| Stages | 9 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Maximum Fluid Temperature | 120 °F |
| Pump Body Material | AISI 304 Stainless Steel |
| Impeller Material | Acetal |
| Motor Bracket Material | Thermoplastic |
| Check Valve | Yes |
| Discharge Material | Thermoplastic |
| Intake Screen Material | Thermoplastic |
| Thrust Bearing | Kingsbury Type |
| Lead Insulation Material | XLPE |
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Diameter With Cable Guard | 3.9 " |
| Motor Length | 11.73 " |
| Product Weight | 32 lb |
| Component Motor Part Number | 2145089003 GS |
| Component Pump Part Number | 93751515 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | Groundwater pumping in clean water well systems 4" diameter and greater |
| Item # | 93741545 |
| Model | 15JS1P4-3W230 |
| Series | 3-Wire Thermoplastic Pumps |
| Product family | J-Class TRI-SEAL Submersible Well Pump |
| Cable Guard Material | Thermoplastic |
| Pump Length | 14.69 " |
| Product Length | 26.42 " |
| Component Control Box Part Number | 2801084915 |
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر
Franklin Electric
اطلب عرض سعر