FE50HH Series High Head Effluent Pump FE50HH-T-30

FE50HH Series High Head Effluent Pump FE50HH-T-30

Name: FE50HH Series High Head Effluent Pump FE50HH-T-30
Brand: Franklin Electric
SKU: franklin-electric-700202

رقم القطعة: franklin-electric-700202

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Automatic submersible effluent pump, 3/4" solids handling, 1/2 hp, all cast iron construction including impeller, 115V, 30' cord, 60HZ, 2" discharge, mechanical float switch Installing a septic system? Designed for continuous duty, the FPS FE50HH Series 1/2-horsepower high head effluent pump is built to last across a variety of challenging commercial installations. With 3/4-inch solids handling capability, it’s a smart choice for dewatering, water transfer, or septic wastewater removal requiring a high head with up to 50 gallons per minute. We also invest in testing that assures quality: before leaving our factory, every pump is wet tested by fully submerging the unit. This ensures you get the performance you need, even in the most challenging jobs. Features and benefits: - Heavy-duty epoxy-coated cast iron housing ensures high strength and heat dissipation . - Energy-efficient PSC motor with thermal overload protection designed for continuous duty . - Unique cloverleaf intake design allows higher flow with 3/4" (19 mm) diameter solids handling . - Ideal for high-head performance in vault applications while maintaining high flow and clog resistance using a cast iron non-clog impeller . - Upper and lower ball bearings allow for a quiet and robust operation . - 2" FNPT discharge (51 mm) - Manual or automatic switch options for application flexibility . - 140 °F (60 °C) maximum liquid temperature rating . - Three-year warranty. - E very pump is wet tested by fully submerging the unit before leaving our factory. - cCSAus listed

المواصفات

HP 60Hz	1/2 hp
Frequency	60 Hz
Phases	Single-Phase
Amps - Full Load	10 A
Volts	115 VAC
Motor	Submersible
Continuous Duty	Yes
Shut Off	50 ft
Shut Off 60 Hz	53 ft
Switch	Tethered
Motor Cooling	Oil
Maximum Fluid Temperature	140 °F
Pump Body Material	Cast Iron
Impeller	Semi-open
Impeller Material	Cast Iron
Intake Screen Material	Not Applicable
Seal	Mechanical Seal
Discharge	Threaded - FNPT
Discharge Diameter	2 "
Product Weight	38.7 lb
Product Weight with Pack	39.7 lb
Carton Length	12.42 "
Carton Width	10.45 "
Carton Height	14.17 "
Electrical Agency Approvals	CSA
Warranty Standard Time	36 Month Purchase / 36 Month Manufacturing
Applications	Standard Effluent - 3/4 In Solids
Item #	700202
Model	FE50HH-T-30
Series	FE50HH Series High Head Effluent Pump
Product family	FE50HH Series High Head Effluent Pump
Pump Length	10.6 "
Product Width	9.45 "
Starting Amps	18 A
Cord Length	30 ft
Maximum Flow Rate - 60 Hz	50 gpm
Pump Base Material	Cast Iron
Motor Shaft End - Material	Stainless Steel
Seal Material	Carbon/Ceramic, Nitrile
Pump Height	10.5 "
Pump Width	9.45 "
Max Solid Handling Size	0.75 "
Thermal Overload Protection (Yes/No)	Yes