FPS E-Series Effluent Pump 10FE07P4-2W230

Franklin Electric

FPS E-Series Effluent Pump 10FE07P4-2W230

رقم القطعة: franklin-electric-94741015

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Designed to pump treated effluent longer distances than normal effluent sump-style pumps, the E-Series is ideal for deep water and higher head pumping applications such as aeration, ornamental fountains, and water fountains. Built with a renowned Franklin Electric submersible motor, the E-Series provides maximum durability with years of reliable service. Features and benefits: - Ideal for effluent pumping applications. - Stainless steel or thermoplastic discharge and motor bracket are tough and non-corrosive. Both materials are highly resistant to damage by minerals, metals, and other substances typically found in water. - Heavy duty, 300 V, 10 ft SJOOW motor leads. - Designed to provide years of reliable service: - 10 and 20 gpm units are equipped with a highly-engineered shaft bearing with built in dry-run protection - High-flow 35 to 90 gpm units are built with a proven and durable ceramic sleeve bearing - Hex rubber bearing has extra large surface assuring shaft stability and multiple flow channels keeping particles away from bearing surfaces. - Proven hydraulic staging allows close tolerances and increased performance. - Carbon phenolic upthrust washer prevents excessive wear in severe applications. - Removable built in check valve on 10-20 gpm pumps. No built in check valves on high capacity pumps. - Powered by a Franklin Electric submersible motor. - Filtered effluent service - Aeration - Ornamental fountains/waterfalls

المواصفات

HP 60Hz3/4 hp
Frequency60 Hz
PhasesSingle-Phase
Amps - Service Factor8 A
Volts230 VAC
Voltage Tolerance (%)-10.0% / +10.0%
Wire2-Wire
MotorSubmersible
Continuous DutyYes
Efficiency Service Factor Load [%]64.00 %
Lead Retainer MethodLead Jam Nut
Flow10 gpm
Shut Off 60 Hz337 ft
Stages8
Motor Ambient Temperature Rating Nominal86 °F
Maximum Fluid Temperature120 °F
Pump Body MaterialAISI 304 Stainless Steel
Impeller MaterialAcetal
Motor Bracket MaterialThermoplastic
Check ValveYes
Discharge MaterialThermoplastic
Intake Screen MaterialThermoplastic
Thrust BearingKingsbury Type
Lead Insulation MaterialXLPE
DischargeThreaded - FNPT
Discharge Diameter1.25 "
Diameter With Cable Guard3.9 "
Motor Length10.64 "
Product Weight29 lb
Component Motor Part Number2445076110 G
Component Pump Part Number94751010
Warranty Standard Time12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Item #94741015
Model10FE07P4-2W230
SeriesThermoplastic Submersible Pump Model
Product familyFPS E-Series Effluent Pump
Cable Guard MaterialThermoplastic
Pump Length14.69 "
Product Length25.33 "

منتجات مشابهة

طلمبات