DR Series Close-Coupled Centrifugal Pump DR1S07-CP-T
رقم القطعة: franklin-electric-97113007
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: franklin-electric-97113007
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
The robust DR1-DR2 series close-coupled centrifugal pump is available in a variety of pump construction materials to enable handling a wide array of applications. Square flange, 56J threaded and 56C keyed shaft motor driven units are available, as well as pump end kits for those customers who choose to provide their own 56J or 56C motors to pair with our close-coupled centrifugal pump. Features and benefits: - Back pull-out design provides access to internal parts without disturbing the plumbing - Robust cast iron volute standard; stainless steel alternate available for DR1 Series - Volute discharge can be rotated in 90° increments with top vertical standard from the factory - Multiple 1/4” NPT drain/pressure ports enable winterizing no matter the volute orientation - Enclosed impeller design for increased efficiencies; thermoplastic and stainless steel options - Multiple mechanical seal construction materials to accommodate handling various fluids - Every pump unit factory wet tested to insure customer satisfaction - Suitable for horizontal or vertical (motor end up) installation - NEMA standard motor options include: - Pump end kits available for 56C & 56J motor construction - Rotation: right hand; clockwise when viewed from motor end - Water circulation - Booster service - Liquid transfer - Spraying systems - Jockey pump service - General purpose pumping
| HP 60Hz | 3/4 hp |
|---|---|
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Volts | 230 VAC / 460 VAC |
| Shut Off | 95 ft |
| Shut Off 60 Hz | 94 ft |
| Stages | 1 |
| Maximum Fluid Temperature | 120 °F |
| Pump Body Material | Cast Iron |
| Impeller | Closed |
| Impeller Material | mPPE |
| Seal | Mechanical Seal |
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1 " |
| Product Weight | 38 lb |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Applications | Ideal for applications requiring water circulation, booster service, liquid transfer, spraying systems, jockey pump service, and general-purpose pumping. |
| Item # | 97113007 |
| Model | DR1S07-CP-T |
| Series | DR1S 1-1/4 x 1 3600 RPM |
| Product family | DR Series Close-Coupled Centrifugal Pump |
| Pump Length | 13.73 " |
| Maximum Flow Rate - 60 Hz | 60 gpm |
| Pump rpm - 60 Hz | 3600 |
| Pump Height | 8.82 " |
| Pump Width | 7.99 " |
| Suction | Threaded - FNPT |
| Motor Enclosure | ODP |
| Suction Diameter | 1.25 " |

Franklin Electric
اطلب عرض سعر

Franklin Electric
اطلب عرض سعر

Franklin Electric
اطلب عرض سعر

Franklin Electric
اطلب عرض سعر

Franklin Electric
اطلب عرض سعر

Franklin Electric
اطلب عرض سعر

Franklin Electric
اطلب عرض سعر

Franklin Electric
اطلب عرض سعر