WEDA D 10N
رقم القطعة: WEDAD10N
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
WEDA D 10N
المواصفات
| Model | WEDA D 10N |
|---|---|
| Series | WEDA D |
| Max. head [m] | 15 |
| Max. capacity [l/min] | 470 / 480 |
| Max. capacity [m3/h] | 28 / 29 |
| Max. solids size [mm] | 4 |
| Weight [kg] | 12,5 |
| Dimensions (height x width x diameter) [mm] | 372x2222x183 |
| Max Head [ft] | 52 |
| Max Flow [US gpm] | 117 |
| Max Solid Handling Size [in] | .16" |
| Hieght (in) | 15.5 / 18.5 (115V) |
| Width (in) | 8.8 |
| Diameter (in) | 7.3 |
| Rating | 1 ph |
| Shaft speed | 3500 r.p.m. |
| Rated input power [kW] | 1 |
| Max. input power [kW] | 1,2 |
| Discharge connection [in] | 2 |
| Installation | Portable drainage pump |
| Hydraulic range | N - normal head |
| Insulation class | F (+155°C/+311°F) IEC 85 |
| Protection class | IP68 |
| Voltage variation | Max ± 5% of nominal voltage |
| Voltage imbalance | Max 2% - between phases |
| Max start-stop | Max 30 starts/hour |
| Cable | H07RN-F (20 m) or SOOW AWG (65 ft) |
| Casted parts | Corrosion resistant aluminum |
| Impeller | High chrome iron, 55±5 HRC |
| Wear parts | Rubber (NBR) |
| Strainer | Hard sole - reinforced polyethylene |
| Shaft | Stainless steel |
| O-rings | Rubber (NBR) |
| Main bearing | Single row ball bearing in oil |
| Mechanical seal | Primary + secondary: grease lubricated lip seal on WC wear sleeve |
| Built-in controls and protection | 1 ph: capacitor + contactor 3 ph: contactor + control relay |
| Thermal contacts | 140°C / 284°F |
| Options / accessories | Float switch Zinc anodes Epoxy coating Low suction collar Quick couplings (hose / NPT / ISO-G / Camlock / Storz) Pump raft Terminal board NSSHÖU screened cable |
| Solids handling, strainer hole | 0.16 in |
| Liquid temperature | Max 104°F |
| Depth of immersion | Max 65 ft |
| Max liquid specific gravity | 1.1 |
| pH of the pumped liquid | pH 5–8 |
| Weight and dimensions | N - Normal Head |
| Power P1 | 1.6 kW |