CIM800 Module c/w Front Cover
رقم القطعة: 555.800.032
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
The CIM800 is a flexible addressable input-monitoring device that fits in the standard ancillary housings. The CIM800 provides two inputs to current MZX panels though this can be implemented as two separately wired spurs (Style B) or as a loop (Style A). Both spur and loop input wiring can be configured to monitor normally open or normally closed inputs. In addition both can be configured to initiate an alarm or short circuit fault message in the event of a short circuit on normally open monitoring circuits. The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm controllers. When used to interface conventional detection devices, Open & Short circuit and device removal monitoring is provided. Intrinsically safe (IS) detection is supported when used with a galvanic isolator An integral line isolator is incorporated in the module. Loop powered or 24vdc operation. The 4-20mA interface can be used to monitor devices such as gas detectors, temperature alarms or any 4-20mA interfaced device. The DDM800 is compatible with MZX Consys version 15 or later.
المواصفات
| ZETTLER Order Code | 555.800.032 |
|---|---|
| ZETTLER Category | Interface & I/O Modules |
| ZETTLER Model | CIM800 |
| ZETTLER Range | Addressable Ancillary Modules |
| EMC/RFI | Equal or exceeds EN50081-1 & EN50130-4 |
| Relative humidity | Up to 95% RH non-condensing |
| Operating Temp | -25°C to +70°C |
| Ambient temperature in operation | -25°C to +70°C |
| Dimensions | 14H x 148W x 87D mm |
| Supply voltage from the loop | 20–40 V DC |
| Current input In standby mode | 0.5 mA |
| Dimensions (W x H x D) with housing | 148 x 87 x 14 mm |
| Weight EOL & Monitor | 100g |
| Resistor | 10k Ohms |
| in alarm mode (with red LED) | 4.5 mA |
| Line resistance | 200 Ω |
| Activation resistance | 100 Ω |
| Max. line resistance on the monitored line | 10 Ω |
| Non-condensing ambient humidity (max.) | 95% |
| S231F+ & CP200. — 555.800.012 | DIM800 Detector Input Module |
| S231F+ & CP200. — 555.800.042 | DIM800 Detector Input Module c/w Cover |
| S231F+ & CP200. — Dimensions (W x H x D) with housing | 148 x 87 x 14 mm |
| S231F+ & CP200. — Weight | 300 g |
| S231F+ & CP200. — Voltage supply from the loop | 20–40 V DC |
| S231F+ & CP200. — Current input In standby mode | 0.28 mA |
| S231F+ & CP200. — Current Input voltage for auxiliary voltage | 21.9–26.4 V DC 105 |
منتجات مشابهة
وحدات الواجهة والإدخال والإخراجZETTLER
MIM800 mini-input module
اطلب عرض سعر
ZETTLER
CIM800 Contact input monitor
اطلب عرض سعر
ZETTLER
DIM800 Module c/w front cover
اطلب عرض سعر
ZETTLER
DIM800 Detector input monitor
اطلب عرض سعر
ZETTLER
LIM800 Ancillary Line Isolator Module
اطلب عرض سعر
ZETTLER
BDM800 Beam Detector Module c/w Cover
اطلب عرض سعر
ZETTLER
LIM800 Ancillary Line Isolator Module c/w front cover
اطلب عرض سعر
ZETTLER
BTM800 Beam Terminal Module c/w Cover
اطلب عرض سعر