TSM800 Door Control Module PCB

ZETTLER

TSM800 Door Control Module PCB

رقم القطعة: 555.800.069

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The TM520 provides two outputs that can be activated based on a delay time. If the key-switch on the module is activated or a predefined event within the control panel occurs, then a timed delay (Between 10 mins and 2 hours 10 mins) is started. When the delay reaches zero the TM520 outputs are activated. The unit sounds an internal buzzer and illuminates a red LED when the outputs are active and illuminates a yellow LED when the timer is counting down. The red LED and the buzzer will pulse 5 minutes before the end of the delay . The TSM800 is used to control fire doors in accordance with BS7273 Part 4. When activated, either by a fire signal or by a fault or isolation within the fire door zone, the TSM800 will interrupt the supply to the door holders and the doors under control of the module will close. The module has the provision to monitor a contact to report to the fire controller if the door fails to close. The module also includes a built-in line isolator. This module requires MZX Consys 10 or later to function. The VIO800 MZX Vesda Interface will enable all versions of the popular LaserPLUS Detectors and 7 relay versions of the Laser SCANNER Detectors to be interfaced directly to the MZX Digital detection loops. 3 configurable inputs and 1 output signal are available from the interface enabling it to integrate fully with the Vesda detector. This module is designed to fit in bay one of the Vesda Detectors.

المواصفات

ZETTLER Order Code555.800.069
ZETTLER CategoryInterface & I/O Modules
ZETTLER Device ClassModule
ZETTLER ModelTSM800
ZETTLER RangeAddressable Ancillary Modules
Weight100 g
Storage temperature–40°C to +80°C
Dimensions87H x148W x 14D mm
Supply voltage from the loop20–40 V DC
Dimensions (W x H x D) with housing148 x 87 x 14 mm
in alarm mode (with red LED)3 mA
Line resistance3.3 kΩ
Powered24Vdc
Temperature Range-20°C to +70°C
Operating Humidity<95% RH
External power supply24 V DC
In standby mode0,425 mA
Contact loadingMax. 2 A on 24 V DC
Alarm resistance680 Ω
Max. switching voltage30 V DC
Max. switching current2 A
No communication45 ± 5 s
Line voltage< 19 V
Ambient temperature-25°C to +70°C

منتجات مشابهة

وحدات الواجهة والإدخال والإخراج