ZETTLER

HVR800 in isolated D800 housing

رقم القطعة: ZT-568.800.034

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The DIM800 is designed to power and monitor a circuit of low voltage conventional detectors and callpoints. The detection circuit is powered from an external 24V d.c. supply and is reset by the MZX panel. The DIM800 monitors the external 24Vdc and provides a fault signal if it is lost. The input detection circuit can be wired as one or two spur circuits (Class B), one loop configured circuit (Class A) or one 4 wire detection circuit. The module is designed to be compatible with most conventional detection products. Compatibility has been tested to date on the following products: M300 Series, M601 Series, S100 Series, H Series, S231F, S231F+ & CP200. The HVR800 module is a non-addressable device which allows a low current mains rated relay to switch up to 10A. Alternatively a low voltage drive signal such as that provided by the RIM800 or 80 way mimic can be used to switch the integral mains relay via the opto-isolated input. The LIM800 Ancillary Line Isolator Module is designed to be used on all MZX addressable loops. It monitors the line condition and upon detection of a short circuit isolates the affected section whilst allowing the rest of the addressable loop to function normally. The LIM800 ensures that on a looped addressable system a short circuit fault cannot disable more detection devices than would be lost on a conventional non-addressable system in accordance with BS5839 Part 1.

المواصفات

ZETTLER Order Code568.800.034
ZETTLER CategoryInterface & I/O Modules
ZETTLER ModelHVR800
ZETTLER RangeAddressable Ancillary Modules
Weight100g
EMC/RFIEqual or exceeds EN50081-1 & EN50130-4
Relative humidityUp to 95% RH non-condensing
Operating Temp-25°C to +70°C
Ambient temperature in operation-25°C to +70°C
Dimensions14H x 148W x 87D mm
Dimensions (W x H x D) with housing42 x 26.5 x 74 mm
Switch element: Housing140 x 120 x 70 mm
Weight (without housing)87.5 g
Possible switch voltages24 V DC, 24 V AC, 120 V AC, 240 V AC
Relay contact loadMax. 10 A/240 V AC Max. 8 A/28 V DC
addressable system. — 545.800.004LIM800 Ancillary Line Isolator Module
addressable system. — 545.800.033LIM800 Ancillary Line Isolator Module c/w Cover
addressable system. — Dimensions (W x H x D) with housing148 x 87 x 14 mm
addressable system. — Weight (with housing)100 g
Power input (loop) — Standby current (max.)80 μA
Power input (loop) — activated (max.)3.5 mA
Power input (loop) — Wire diametermin. 0.6 mm2, max. 1.5 mm2
Power input (loop) — Ambient temperature-25°C to +70°C
Power input (loop) — Humidity without condensation (max.)95% 107

منتجات مشابهة

وحدات الواجهة والإدخال والإخراج