DDM800 Universal Fire and Gas Module c/w front cover

ZETTLER

DDM800 Universal Fire and Gas Module c/w front cover

رقم القطعة: 577.800.036

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The CIM800 is a flexible addressable input-monitoring device that fits in the standard ancillary housings. The CIM800 provides two inputs to current MZX panels though this can be implemented as two separately wired spurs (Style B) or as a loop (Style A). Both spur and loop input wiring can be configured to monitor normally open or normally closed inputs. In addition both can be configured to initiate an alarm or short circuit fault message in the event of a short circuit on normally open monitoring circuits. The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm controllers. When used to interface conventional detection devices, Open & Short circuit and device removal monitoring is provided. Intrinsically safe (IS) detection is supported when used with a galvanic isolator An integral line isolator is incorporated in the module. Loop powered or 24vdc operation. The 4-20mA interface can be used to monitor devices such as gas detectors, temperature alarms or any 4-20mA interfaced device. The DDM800 is compatible with MZX Consys version 15 or later.

المواصفات

ZETTLER Order Code577.800.036
ZETTLER CategoryInterface & I/O Modules
ZETTLER ModelDDM800
ZETTLER RangeAddressable Ancillary Modules
Operating Temperature-25°C to +70°C
Storage temperature–40°C to +80°C rel.
EMC/RFIEqual or exceeds EN50081-1 & EN50130-4
Relative humidityUp to 95% RH non-condensing
Operating Temp-25°C to +70°C
Dimensions14H x 148W x 87D mm
Weight EOL & Monitor100g
Resistor10k Ohms
Humidity without condensation (max.)95%
alarms or any 4-20mA interfaced device. — 577.800.006DDM800 Universal Fire and Gas Module
alarms or any 4-20mA interfaced device. — 577.800.036DDM800 Universal Fire and Gas Module w/c Cover
alarms or any 4-20mA interfaced device. — 577.800.056DDM800 Universal Fire and Gas Module housed in IP55 D800
alarms or any 4-20mA interfaced device. — 557.800.057557.800.057 Detector Removal End of Line Resistor (pack of 10)
alarms or any 4-20mA interfaced device. — Dimensions (W x H x D) with housing148 x 87 x 14 mm
alarms or any 4-20mA interfaced device. — Weight300 g
alarms or any 4-20mA interfaced device. — Voltage supply from the loop20–40 V DC
Current input — Current input In standby mode2.2 mA
Current input — In alarm mode (with LED)7.7 mA
Current input — Input voltage for auxiliary voltage21.9-29 V
Current input — Operating temperature-25°C to +70°C
Current input — Storage temperature–40°C to +80°C rel.
Current input — Humidity without condensation (max.)95%

منتجات مشابهة

وحدات الواجهة والإدخال والإخراج