FST-951 Intelligent Addressable Heat Detector
رقم القطعة: FST-951R-IV
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
رقم القطعة: FST-951R-IV
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
The NOTIFIER® FST-951 Series intelligent thermal detectors are designed for both performance and aesthetics, and are direct replacements for the FST-851 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the FST-951 Series ideal for both system operation and building design. The point ID address, set using rotary decimal switches, provide specific detector locations. The series includes a 135°F/57°C fixed-temperature, rate-of-rise, and a 190°F/88°C fixed high-temperature detectors. These thermal detectors provide effective, intelligent property protection in a variety of applications. Detectors are available for both FlashScan® and CLIP applications as designated. SLC LOOP: • Two-wire SLC loop connection • Unit uses base for wiring ADDRESSING: • Addressable by device • Rotary, decimal addressing (Refer to the NOTIFIER panel manuals for device capacity.) ARCHITECTURE: • Designed to meet UL 268 7th Edition • Sleek, low-profile, stylish design • State-of-the-art thermistor technology for fast response • Integral communications and built-in device-type identification • Built-in tamper resistant feature • Built-in functional test switch activated by external magnet OPERATION: • Fixed temperature model (FST-951) factory preset to 135°F (57°C) • Rate-of-rise model (FST-951R),15°F (8.3°C) per minute • High-temperature model FST-951H) factory preset to 190°F (88°C) • 360°-field viewing angle of the two visual alarm indicators, LEDs blink red in Normal condition and turn on steady red in Alarm • LEDs blink every time the unit is polled MECHANICALS: • Sealed against back pressure • SEMS screws for wiring of the separate base • Designed for direct-surface or electrical-box mounting • Plugs into separate base for ease of installation and maintenance • Separate base allows interchange of photoelectric, ionization and thermal sensors OTHER SYSTEM FEATURES: • Remote test feature from the panel • Walk test with address display • Low standby current OPTIONS: • Remote LED output connection to optional RA100Z remote LED annunciator
| Brand | NOTIFIER |
|---|---|
| Specifications / Size | 2.0" (5.3 cm) high; base determines diameter |
| Specifications / Shipping weight | 3.4 oz. (95 g) |
| Specifications / Relative humidity | 10% – 93% non-condensing |
| Specifications / Thermal ratings | fixed-temperature set point 135°F (57°C), rate-of- |
| Electrical Specifications / Voltage range | 15 - 32 volts DC peak |
| Electrical Specifications / Standby current (max. avg.) | 200µA @ 24 VDC (one communica- |
| Electrical Specifications / Max current | 4.5 mA @ 24 VDC (“ON”) |
| Electrical Specifications / UL/ULC Listing | S747 |
| Electrical Specifications / CSFM | 7270-0028:0502 |
| Specifications / Sensitivity | UL Applications: 0.5% to 4.0% per foot obscuration |
| Specifications / FST-951, FST-951R Series | –4°F to 100°F (–20°C to 38°C) |
| Specifications / FST-951H Series | –4°F to 150°F (–20°C to 66°C) |
| Specifications / Detector spacing | UL approved for 50 ft. (15.24 m) center-to-cen- |
| Specifications / Mounting | B300-6(A) flanged base, included |
NOTIFIER
اطلب عرض سعر
NOTIFIER
اطلب عرض سعر
NOTIFIER
اطلب عرض سعر
NOTIFIER
اطلب عرض سعر
NOTIFIER
اطلب عرض سعر