Fault Isolator

Name: Fault Isolator
Brand: NOTIFIER
SKU: ISO-X

رقم القطعة: ISO-X

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

The Notifier ISO-X(A) Fault Isolator Module is used with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loops. • Powered by SLC loop directly, no external power required. • Base mounts on standard junction boxes (4.0″/10.16 cm square by 2.125″/5.398 cm deep). • Integral LED blinks to indicate normal condition. Illuminates steady when short circuit condition is detected. • High noise (EMF/RFI) immunity. • Wide viewing angle of LED. • SEMS screws with clamping plates for ease of wiring. • Opens SLC loop automatically on detection of short, preventing the short from causing failure of the entire loop. • Automatically resets on correction of short. • Supports Style 4, 6, or 7 wiring.

المواصفات

Brand	NOTIFIER
Specifications / Normal Operating Voltage	15 – 32 VDC (peak)
Specifications / Temperature Range	32°F to 120°F (0°C to 49°C)
Specifications / Relative humidity	10% to 93% (non-condensing)
Specifications / Standby current	450 A (not isolating)
Specifications / Maximum current draw	17 mA (device in isolation, LED
Specifications / Weight	5 oz. (150 grams)
Specifications / Dimensions	4.5”H x 4.5”W x 0.25” D (11.43 cm H x
Agency Listings And Approvals / ULC	S635 (OUOXXC, ISO-XA)
Agency Listings And Approvals / MEA	17-96-E
Agency Listings And Approvals / U.S. Coast Guard	161.002/42/1 (NFS-640)
Agency Listings And Approvals / Lloyd’s Register	11/600013 (NFS2-640/NFS-320/NFS-
Agency Listings And Approvals / BSA	578-81-SA