305 CR Mini Hydraulic Excavator

Caterpillar

305 CR Mini Hydraulic Excavator

رقم القطعة: CAT-112620

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

305 CR Mini Hydraulic Excavator

المواصفات

Engine ModelC1.7 Turbo
Bore84 mm
Stroke100 mm
Displacement1.662 l
Note (1)*Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.
Note (2)Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2400 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load.
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1.65 lb), 0.90 kg (1.98 lb) or 1 kg (2.20 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons) for R134a and 0.001 tonnes (0.001 tons) for R1234yf (Europe).
NoteAdvertised power is tested per the specified standard in effect at the time of manufacture.
Fuel Tank63 l
Cooling System11 l
Hydraulic System75 l
Model305 CR - Tier 4 / Stage V
Product Pagehttps://www.cat.com/en_US/products/new/equipment/excavators/mini-excavators/112620.html
Caterpillar CategoryMini Excavators
Caterpillar Category PathProducts > Equipment > Excavators > Mini Excavators > 305 CR - Tier 4 Stage V
Caterpillar Product Familyequipment
TypeLoad Sensing Hydraulics with Variable Displacement Piston Pump
Caterpillar Product Page ID112620
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20210827-2c369-067ed
EmissionsThe Cat® C1.7 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Operating Weight5754 kg
Counterweight242 kg
Dig Depth3670 mm
Recyclability96%
Hydraulic Tank60 l
Engine Oil6 l
Net Power33.6 kW
Minimum Operating Weight with Canopy*4996 kg
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC33.6 kW
Maximum Operating Weight with Canopy**5655 kg
Minimum Operating Weight with Cab*5095 kg
Gross Power - 2,400 rpm - SAE J1995:201436.1 kW
Maximum Operating Weight with Cab**5754 kg
Vertical Wall2560 mm
Maximum Blade Height385 mm
Maximum Reach - Ground Level5835 mm
Maximum Reach5990 mm
Weights — Note (2)**Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.
Track Belt/Shoe Width400 mm
Maximum Dig Height5355 mm
Tail Swing with Counterweight1200 mm
Maximum Dump Clearance3845 mm
Boom In Reach2580 mm
Maximum Blade Depth595 mm
Tail Swing without Counterweight1095 mm
Boom Height - Shipping Position1895 mm
Stick Length1601 mm
O/A Shipping Height2550 mm
Ground Clearance335 mm
Swing Bearing - Height619 mm
O/A Undercarriage Length2580 mm
Boom Swing - Right865 mm
Overall Shipping Length*5340 mm
Boom Swing - Left24.2 °
Track Width1980 mm
Long Stick34 kg
Dimensions - Long Stick — Note*Overall Shipping Length depends on blade position during shipment.
Steel Tracks with Pads375 kg
Angle Blade102 kg
Travel Speed - High5 km/h
Travel Speed - Low2.8 km/h
Ground Pressure - Minimum Weight27.3 kPa
Maximum Traction Force - High Speed24.7 kN
Ground Pressure - Maximum Weight32.2 kPa
Maximum Traction Force - Low Speed50.5 kN
Gradeability - Maximum30 degrees
Pump Flow at 2,400 rpm133 L/min
Operating Pressure - Travel265 bar
Operating Pressure - Equipment265 bar
Auxiliary Circuit - Primary - Flow80 L/min
Operating Pressure - Swing200 bar
Digging Force - Bucket49.2 kN
Auxiliary Circuit - Primary - Pressure265 bar
Auxiliary Circuit - Secondary - Flow28 L/min
Auxiliary Circuit - Secondary - Pressure265 bar
Digging Force - Stick - Standard28.3 kN
Digging Force - Stick - Long25.2 kN
Hydraulic System — NoteFlow and pressure are not combinable. Under load, as flow rises pressure goes down.
Machine Swing Speed9 r/min
Swing System — Boom Swing - Left72 Degrees
Swing System — Boom Swing - Right50 Degrees
Roll Over Protective Structure (ROPS)ISO 12117-2:2008
Straight Blade Width1980 mm
Angle Blade Width1980 mm
Straight Blade Height390 mm
Top GuardISO 10262:1998 Level I
Angle Blade Height400 mm
Dimensions - Standard Stick — Dig Depth3420 mm
Operator Sound Pressure (ISO 6396:2008)76 dB(A)
Angle Blade - Left25 degrees
Dimensions - Standard Stick — Vertical Wall2335 mm
Average Exterior Sound Pressure (ISO 6395:2008)97 dB(A)
Angle Blade - Right25 degrees
Dimensions - Standard Stick — Maximum Reach - Ground Level5590 mm
Dimensions - Standard Stick — Maximum Reach5755 mm
Dimensions - Standard Stick — Stick Length1351 mm
Dimensions - Standard Stick — Maximum Dig Height5215 mm
Dimensions - Standard Stick — Maximum Dump Clearance3700 mm
Dimensions - Standard Stick — Boom In Reach2570 mm
Dimensions - Standard Stick — Boom Height - Shipping Position1820 mm
Sound — Note*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Dimensions - Standard Stick — Overall Shipping Length*5305 mm
Dimensions - Standard Stick — Boom Swing - Left615 mm
Dimensions - Standard Stick — Note*Overall Shipping Length depends on blade position during shipment.

منتجات مشابهة

معدات ثقيلة وآليات