285 XE Compact Track Loader

Caterpillar

285 XE Compact Track Loader

رقم القطعة: CAT-127702

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

285 XE Compact Track Loader

المواصفات

Engine ModelCat​​​​​​​® C3.6 TA (turbocharged after-cooled)
Gross Power - SAE J1995:201491 kW
Bore120 mm
Stroke98 mm
Displacement3.6 l
NoteMaximum Gross Power ISO 14396:2002 (at 2200 RPM) – with High Flow Attachment connected: 100 kW (134.1 hp)
Fuel Tank136.1 l
Cooling System17.5 l
Hydraulic System41 l
Engine Crankcase9 l
Model285 XE
Product Pagehttps://www.cat.com/en_US/products/new/equipment/skid-steer-and-compact-track-loaders/compact-track-loaders/127702.html
Caterpillar CategoryCompact Track Loaders
Caterpillar Category PathProducts > Equipment > Skid Steer and Compact Track Loaders > Compact Track Loaders > 285 XE
Caterpillar Product Familyequipment
Caterpillar Product Page ID127702
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20241119-04228-9bac5
Operating Weight6200 kg
Hydraulic Tank26 l
Diesel Exhaust Fluid (DEF) Tank11 l
Ground Clearance280 mm
Net Power - ISO 924989 kW
Weights — Note*Operating Weight, Operating Specifications, and Dimensions are all based on 75 kg (165 lb) operator, all fluids, two speed, 2188 mm (86 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, open Rollover Protective Structure (ROPS) cab,mechanical suspension seat, standard monitor, 1000 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted).
Height - Top of Cab2230 mm
Peak Torque - 1,500 rpm - SAE J1995551 N·m
Net Power - SAE 134990 kW
Rated Operating Capacities - 35% Tipping Load2050 kg
Tipping Load5868 kg
Breakout Force - Tilt Cylinder6314 kg
Length - Track on Ground1830 mm
Breakout Force - Lift Cylinder3960 kg
Ground Pressure - With 400 mm/15.7 in Track38.9 kPa
Ground Pressure - With 450 mm/17.7 in Track34.7 kPa
Rated Operating Capacities - 50% Tipping Load2929 kg
Ground Contact Area - With 450 mm/17.7 in Track1.76 m²
Overall Length - Track2170 mm
Counterweight Adds to Operating Weight194 kg
Departure Angle26°
Length - With Bucket on Ground3998 mm
Maximum Dump Angle40.5°
Length - Without Bucket3360 mm
Maximum Reach - With Arms Parallel to Ground1285 mm
Vehicle Width (450 mm/17.7 in tracks)2078 mm
Turning Radius from Center - Coupler1578 mm
Maximum Overall Height4520 mm
Bucket Pin Height - Carry Position209 mm
Rack Back Angle - Maximum Height89°
Turning Radius from Center - Machine Rear1887 mm
Bucket Pin Height - Maximum Lift3724 mm
Turning Radius from Center - Bucket (racked)2400 mm
Clearance at Maximum Lift and Dump3039 mm
Bucket Pin Reach - Maximum Lift413 mm
Roll Back Angle27.2°
ROPSISO 3471:2008
Reach at Maximum Lift/Dump882 mm
Travel Speed - Forward or Reverse - Two Speed12 km/h
FOPSISO 3449:2005 Level I
Travel Speed - Forward or Reverse - One Speed7.8 km/h
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure28000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Pressure24130 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow86 L/min
FOPS Level IIISO 3449:2005 Level II (Optional)
Hydraulic Flow - Standard - Hydraulic Power (Calculated)34.6 kW
Hydraulic Flow - XE - Hydraulic Power (calculated)77.5 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow129 L/min
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*150 L/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)60.2 kW
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure31000 kPa
Counterweight Adds to Operating Weight - ROC (35%)134 kg
Counterweight Adds to Operating Weight - Tip Load384 kg

منتجات مشابهة

معدات ثقيلة وآليات