Caterpillar

Cat 907 Compact Wheel Loader

Name: Cat 907 Compact Wheel Loader
Brand: Caterpillar
SKU: CAT-116360

رقم القطعة: CAT-116360

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

Cat 907 Compact Wheel Loader

المواصفات

Engine Model	Cat C2.8*
Bore	90 mm
Stroke	110 mm
Displacement	2.8 l
Note (1)	Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	Net power advertised is the power available at the flywheel.
Note (3)	#Maximum gross and net torque measured at 1,600 rpm.
Note (4)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.
Note (5)	†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)	††Full compliance to EN474-3 and SAE J1197.
Note	*Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Fuel Tank	90 l
Cooling System	12 l
Engine Crankcase	8.8 l
Transmission	2.4 l
Model	907
Product Page	https://www.cat.com/en_US/products/new/equipment/wheel-loaders/compact-wheel-loaders/116360.html
Caterpillar Category	Compact Wheel Loaders
Caterpillar Category Path	Products > Equipment > Wheel Loaders > Compact Wheel Loaders > 907
Caterpillar Product Family	equipment
Caterpillar Product Page ID	116360
Datasheet URL	https://s7d2.scene7.com/is/content/Caterpillar/CM20220426-0e345-7fb86
Front	Fixed (standard), Locking Differential (optional)
Operating Weight	5792 kg
Dig Depth	85 mm
Transmission — Note	#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Transmission — Note (1)	*Creep function not available in this gear or above.
Transmission — Note (2)	**Max speed dependent on model and configuration (standard vs. high speed transmission).
Recyclability	93%
Hydraulic Tank	44.6 l
Hydraulic System - Including Tank	67.5 l
Tires — Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Tires — Note (2)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab — Note (1)	Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Tires — Note	*This tire has been used for all dimension, stability and performance data.
Cab — Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).
Cab — Note (3)	*Measurements were conducted with the cab doors and windows closed.
Rated Net Power - SAE J1349	54.2 kW
ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II
Service Refill Capacities — Note	No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Note (7)	#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Bucket Capacities	0.75-1.55 m³ (1.0-2 yd³)
Maximum Gross Power	55.7 kW
Maximum Engine Speed	2550 rpm
Maximum Gross Power - Rated Engine Speed	2400 r/min
Bucket Capacities - General Purpose	0.80-1.35 m³ (1.0-1.7 yd³)
Maximum Gross Power - SAE J1995	55.7 kW
Maximum Gross Power - ISO 14396	55.4 kW
Bucket Capacities - Light Material	1.25-1.55 m³ (1.6-2 yd³)
Maximum Gross Power - ISO 14396 (metric)	75.3 mhp
Rated Net Power - Rated Engine Speed	2400 r/min
Rated Net Power - ISO 9249	53.8 kW
Hydraulic Cycle Time - Lift	5 s
Rated Net Power - 2,400 rpm - ISO 9249 (metric)	73.1 mhp
Hydraulic Cycle Time - Dump	1.6 s
Maximum Gross Torque - SAE J1995	300 N·m
Maximum Gross Torque - ISO 14396	300 N·m
Maximum Net Torque - SAE J1349	296 N·m
Maximum Net Torque - ISO 9249	295 N·m
Multi-Purpose	0.75-1.1 m³ (1.0-1.4 yd³)
Buckets — Note	Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Departure Angle - Degrees	30°
Buckets — Note (1)	Bucket capacities stated include BOCE, in line with ISO 7546.
Axles - Front Center Differential	8.8 l
Axles - Rear Center Differential	8.8 l
Rear	Fixed (standard), Locking Differential (optional)
Axles — Note	Oscillation of ±11 degrees via hitch between front and rear frames.
Steering Articulation Angle - Each Direction	39 °
Maximum Flow - Steering Pump	46.7 L/min
Maximum Working Pressure - Steering Pump	23000 kPa
Turning Radius - Over Bucket*	4563 mm
Steering Cycle Times – (full left to full right) – at High Idle	2.8 s
Turning Radius - Inside Tire**	2057 mm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.25 turns or 4.00 turns
Forward and Reverse - Speed Range Creep#	10 km/h
Forward and Reverse - Speed Range 1*	10 km/h
Forward and Reverse - Speed Range 2** - High Speed	17 km/h
Forward and Reverse - Speed Range 2** - Standard	20 km/h
Forward and Reverse - Speed Range 3***	40 km/h
Transmission — Note (3)	***Reverse is 30 km/h (19 mph).
Tire Size - Standard	*405/70 R18 SPT9
Tire Size - Optional	405/70 R18 Powerloads
Tire Size - Optional (1)	340/80 R18 XMCL/Bibload
Tire Size - Optional (2)	340/80 R18 TRI 2
Tire Size - Optional (3)	40X14-20 TL, SM/TR
Tire Size - Optional 4	340/80 R18 Duraforce
Main Relief - 1st Auxiliary (3rd slice)	23500 kPa
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*	80 L/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow*	120 L/min
Main Relief - 2nd Auxiliary (4th slice)	23500 kPa
Main Relief - 2nd Auxiliary (4th slice) - Flow	45 L/min
Hydraulic Cycle Time - Rackback	2.2 s
Hydraulic Cycle Time - Float Down	2.8 s
Loader Hydraulic System — Note	* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Height: Ground to Cab**	2592 mm
Height: Ground to Beacon**	2774 mm
Height: Ground Axle Center**	480 mm
Height: Ground Clearance**	300 mm
Length: Overall*	5366 mm
Length: Rear Axle to Bumper	1391 mm
Length: Hitch to Front Axle	1085 mm
Length: Wheel Base	2170 mm
Clearance: Bucket at 45° *	2505 mm
Clearance: Load over Height**	2902 mm
Length: Front Axle to Front of Coupler	1065 mm
Clearance: Level Bucket**	3037 mm
Height: Bucket Pin**	3251 mm
Height: Overall**	4122 mm
Reach: Bucket at 45° *	714 mm
Carry Height: Bucket Pin	324 mm
Width: Bucket	2045 mm
Width: Tread Center	1420 mm
Turning Radius: Over Bucket	4489 mm
Height - Ground to Cab**	2591 mm
Width: Over Tires	1848 mm
Turning Radius: Outside of Tires	3925 mm
Turning Radius: Inside of Tires	2057 mm
Height - Ground Clearance**	300 mm
Rack Angle at Full Lift	56°
Dump Angle at Full Lift	45°
Rack Angle at Carry	51°
Articulation Angle - Degrees	39°
Operating Weight: Bucket ^	5756 kg
Length - Wheel Base	2170 mm
Tipping Load - Straight - ISO 14397-1 †	4433 kg
Clearance - Bucket at 45°*	2392 mm
Tipping Load - Full Turn - ISO 14397-1 †	3735 kg
Operating Weight: Carriage and Tines ^^	5543 kg
Clearance - Level Bucket**	3028 mm
Tipping Load - Straight †	3541 kg
Height - Bucket Pin**	3251 mm
80% of Tip: Firm and Level EN474-3 ††	2384 kg
Dimensions - With HPL-V Coupler - Approximate# — Note (1)	*Vary with bucket
Reach - Bucket at 45°*	813 mm
Tipping Load - Full Turn †	2980 kg
Dimensions - With HPL-V Coupler - Approximate# — Note (2)	**Vary with tire
Dimensions - With HPL-V Coupler - Approximate# — Note (3)	^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Width - Bucket	2045 mm
Dimensions - With HPL-V Coupler - Approximate# — Note (4)	^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (8)	Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Width - Tread Center	1420 mm
Note (9)	Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
Width - Over Tires	1848 mm
Length - Overall with Bucket	5525 mm
Dimensions - With SSL Coupler - Approximate — Length: Front Axle to Front of Coupler	1316 mm
Dimensions - With SSL Coupler - Approximate — Height: Overall**	4212 mm
Dimensions - With SSL Coupler - Approximate — Carry Height: Bucket Pin	346 mm
Dimensions - With SSL Coupler - Approximate — Rack Angle at Full Lift	51°
Dimensions - With SSL Coupler - Approximate — Dump Angle at Full Lift	50°
Dimensions - With SSL Coupler - Approximate — Rack Angle at Carry	46°
Dimensions - With SSL Coupler - Approximate — Operating Weight: Bucket ^	5842 kg
Tipping Load – Straight – ISO 14397-1 †	3925 kg
Tipping Load – Full Turn – ISO 14397-1 †	3292 kg
Dimensions - With SSL Coupler - Approximate — Operating Weight: Carriage and Tines ^^	5631 kg
Dimensions - With SSL Coupler - Approximate — Tipping Load - Straight †	3364 kg
Dimensions - With SSL Coupler - Approximate — 80% of Tip: Firm and Level EN474-3 ††	2274 kg
Dimensions - With SSL Coupler - Approximate — Note (1)	*Vary with bucket
Dimensions - With SSL Coupler - Approximate — Tipping Load - Full Turn †	2842 kg
Dimensions - With SSL Coupler - Approximate — Note (2)	**Vary with tire
Dimensions - With SSL Coupler - Approximate — Note (3)	^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Dimensions - With SSL Coupler - Approximate — Note (4)	^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).