6030 Hydraulic Shovel
رقم القطعة: CAT-102960
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
6030 Hydraulic Shovel
المواصفات
| Bore | 137.7 mm |
|---|---|
| Stroke | 152.4 mm |
| Displacement | 27 l |
| Note | Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions. |
| Model | 6030 |
| Product Page | https://www.cat.com/en_US/products/new/equipment/hydraulic-mining-shovels/hydraulic-mining-shovels/102960.html |
| Caterpillar Category | Hydraulic Mining Shovels |
| Caterpillar Category Path | Products > Equipment > Hydraulic Mining Shovels > Hydraulic Mining Shovels > 6030 |
| Caterpillar Product Family | equipment |
| Caterpillar Product Page ID | 102960 |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20250905-220fe-0d008 |
| Fuel Tank Capacity | 5080 l |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards |
| Operating Weight | 294 t |
| Components (1) | Hydraulically driven radiator fan with electronically controlled fan speed |
| Components (2) | Micro processed engine management |
| Components (3) | Heavy-duty air filters |
| Components (4) | Two-stage fuel filter, including water separator |
| Components (5) | Additional high-capacity water separator |
| Components (6) | Emergency egress ladder with ladder cage |
| Components (10) | Windshield with parallel intermittent wiper/washer |
| Components (9) | Roller blinds at all windows |
| Components (12) | Operator Protective Guards (ISO 10262:1998 Level II |
| Components (7) | Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat |
| Components (11) | All-round safety glass, armored windshield and sliding side window |
| Components (8) | Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests |
| Components (14) | Fold-away auxiliary seat with safety belt |
| Components (13) | Joystick controls integrated in independently adjustable seat consoles |
| Net Power - ISO 9249 | 1212 kW |
| Maximum Pressure - Travel | 360 bar |
| Type (1) | Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times |
| Swing Drive | 2 compact planetary transmissions with axial piston motors |
| Type (2) | Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders |
| Engine Output - SAE J1995 | 1230 kW |
| Bucket Payload | 30 t |
| Number of Cylinders - Each Engine | 12 |
| Gross Power - SAE J1995 | 1230 kW |
| Net Power - SAE J1349 | 1149 kW |
| Aspiration | Turbocharged and air-to-air aftercooled |
| Diesel Engine - Lesser Regulated — Gross Power - SAE J1995 | 1142 kW |
| Diesel Engine - Lesser Regulated — Net Power - SAE J1349 | 1063 kW |
| Diesel Engine - Lesser Regulated — Net Power - ISO 9249 | 1127 kW |
| Diesel Engine - Lesser Regulated — Emissions | Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2 |
| System Voltage | 24V |
| Batteries in Series/Parallel Installation | 4 x 210 Ah at 12V each; 420 Ah with 24V in total |
| Electrical System - Diesel Drive — Components (1) | Battery isolation relays |
| Maximum Pressure - Attachment | 310 bar |
| Electrical System - Diesel Drive — Components (2) | Emergency stop switches accessible from ground level and in engine module |
| Main Pumps | 4 x variable swash plate pumps |
| Electrical System - Diesel Drive — Components (3) | 14 LED high-brightness working flood lights |
| Electrical System - Diesel Drive — Components (4) | 11 LED service lights |
| Batteries | 4 maintenance-free batteries |
| 6030 FS - Standard Track Pads | 1000 mm |
| 6030 FS - Operating Weight | 298300 kg |
| 6030 FS - Ground Pressure | 22.2 N/cm² |
| 6030 - Standard Track Pads | 1000 mm |
| 6030 - Operating Weight | 299400 kg |
| Operating Weights — Note | Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants. |
| 6030 - Ground Pressure | 22.3 N/cm² |
| Hydraulic Tank Capacity - Approximately | 2675 l |
| Total Volume of Hydraulic Oil - Approximately | 3500 l |
| Main Pumps - Maximum Oil Flow - Diesel Version | 4 x 552 L/min (4 x 146 gal/min) |
| Swing Pumps | 2 x reversible swash plate double pumps |
| Swing Pumps - Maximum Oil Flow - Diesel Version | 4 x 197 L/min (4 x 52 gal/min) |
| Maximum Pressure - Swing Pumps | 350 bar |
| Oil Flow of Cooling Pumps - Diesel Version | 2 x 467 L/min (2 x 123 gal/min) |
| Type (5) | Grease filters between service station and container as well as directly behind grease pump |
| Diameter - Fan | 1220 mm |
| Type (3) | Lubricated pinion for greasing of internal gearing of swing ring |
| Parking Brakes | Wet multiple-disc brake, spring-loaded/hydraulically released |
| Type (4) | System failures displayed by Board Control System |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Maximum Swing Speed - Diesel Version | 4.6 r/min |
| Maximum Swing Speed - AC Version | 5 r/min |
| Travel Speed - 1st Stage - Maximum | 1.4 km/h |
| Travel Speed - 2nd Stage - Maximum | 2.7 km/h |
| Internal Dimensions of Cab - Height | 2150 mm |
| Maximum Tractive Force | 1602 kN |
| Internal Dimensions of Cab - Width | 1600 mm |
| Gradeability - Travel Drives - Approximate | 47 % |
| Track Pads - Each Side | 44 |
| Internal Dimensions of Cab - Length | 2200 mm |
| Bottom Rollers - Each Side | 7 |
| Support Rollers - Each Side | 2 plus a skid plate in between |
| Operator's Cab — Components (1) | Under roof mounted heating ventilating and air conditioning system |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Operator's Cab — Components (2) | External sun shields at side and rear windows |
| Undercarriage — Components (1) | All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened |
| Undercarriage — Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released |
| Undercarriage — Components (5) | Acoustic travel alarm |
| Undercarriage — Components (2) | Cast double-grouser combined pad-links with bushings connected by hardened full floating pins |
| Operator's Eye Level - Approximately | 6.5 m |
| Undercarriage — Components (3) | Fully hydraulic self-adjusting track tensioning system with membrane accumulator |
| Operator's Cab — Components (3) | Robust instrument panel including large colored BCS screen with transflective technology |
| Undercarriage — Components (4) | Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
| Operator's Cab — Components (4) | Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system |
| Operator's Cab — Components (5) | Hydraulically operated 45 degree access stairway |
| Capacity - Grease Container | 450 l |
| All buckets (FS and BH) are equipped with a wear package consisting of: (2) | Wing shrouds on side walls and heel shrouds at bottom edges |
| Bucket Capacity - Face Shovel (heaped 2:1) | 16.5 m³ |
| Bucket Capacity - Backhoe (heaped 1:1) | 17 m³ |
| Maximum Crowd Force | 1298 kN |
| Maximum Tearout Force | 944 kN |
| Attachments — Type (1) | Catwalks with rails at booms |
| Attachments — Type (2) | Special wear packages for highly abrasive materials on request |
| Attachments — Type (3) | Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
| Attachments — Type (4) | Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
| Shovel attachment with unique TriPower kinematics ensuring the following main feat~7ca1d2 | Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces |
| Shovel attachment with unique TriPower kinematics ensuring the following main feat~193453 | Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance |
| Shovel attachment with unique TriPower kinematics ensuring the following main feat~e6a202 | Constant boom momentum throughout the whole lift arc and crowd force assistance |
| All buckets (FS and BH) are equipped with a wear package consisting of: (1) | Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth |
| Type (6) | Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas |
| Attachments — Type (5) | Booms and sticks are stress-relieved after welding |
منتجات مشابهة
معدات ثقيلة وآلياتCaterpillar
MD6200 Rotary Blasthole Drill Specifications
اطلب عرض سعر
Caterpillar
6040 Hydraulic Mining Shovel
اطلب عرض سعر
Caterpillar
330 UHD Ultra High Demolition Hydraulic Excavator
اطلب عرض سعر
Caterpillar
6060 Hydraulic Mining Shovel
اطلب عرض سعر
Caterpillar
Cat® 352 UHD Ultra High Demolition Hydraulic Excavator
اطلب عرض سعر
Caterpillar
MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration
اطلب عرض سعر
Caterpillar
340 UHD Ultra High Demolition Hydraulic Excavator
اطلب عرض سعر
Caterpillar
903D Compact Wheel Loader
اطلب عرض سعر