MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration
رقم القطعة: CAT-1000032468
لا يعرض أي بائع سعرًا لهذا المنتج بعد.
للطلب والدفع استخدم تطبيق ENG.
الوصف
MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration
المواصفات
| Note (1) | Hydraulic, indexing pipe carousels accept various pipe diameters |
|---|---|
| Note (2) | Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling |
| Note | With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption– Both high and low pressure compressors contain this feature |
| Model | Cat® 349E EL Excavator type |
| Product Page | https://www.cat.com/en_US/products/new/equipment/drills/rotary-drills/1000032468.html |
| Caterpillar Category | Rotary Drills |
| Caterpillar Category Path | Products > Equipment > Drills > Rotary Drills > MD6310 |
| Caterpillar Product Family | equipment |
| Type | Autonomy ready |
| Caterpillar Product Page ID | 1000032468 |
| Datasheet URL | https://s7d2.scene7.com/is/content/Caterpillar/CM20201124-79530-26ffe |
| Engine | Cat® C32B |
| Pull-Down Capacity | Up to 39 009 kg (86,000 lb) |
| Bit Load | Up to 42 149 kg (Up to 92,922 lb) |
| Hole Diameter | 229-311 mm (9-12.25 in) |
| Body Length - Standard Cab | 13.27 m |
| Components (1) | Alloy drill deck covers, with storage provision |
| Length - Mast Down - Extended Cab | 25.43 m |
| Components (2) | Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left |
| Length - Mast Down - Standard Cab | 24.9 m |
| Features | Functional in ambient temperature of 52° C (125° F) |
| Width - Front | 5.39 m |
| Features (1) | 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel |
| Body Length - Extended Cab | 13.79 m |
| Height - Mast Up | 23.77 m |
| Width - Rear | 6.32 m |
| 13.7 m (44.9 ft) Mast - Hoist Speed | 37.4 m/min |
| 17.5 m (57.4 ft) Mast - Hoist Speed | 37.4 m/min |
| Emissions (Equivalent to Tier 2): Engine | C32B @ 1,800 rpm |
| Cooling — Components (1) | Coolers with easy cleaning access |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 74.6 m (Down to 244.9 ft) |
| Cooling — Components (2) | Separate engine cooling module |
| Compressor - DTH Drilling | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 47.9 m (Down to 157.4 ft) |
| Components (3) | Electric horn activated by push button in the cab |
| Components (4) | Tram alarm is automatic and audible |
| 17.5 m (57.4 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 17.5 m |
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) temperatures |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) |
| Angle Drilling | Vertical to 30° (in 5° increments) |
| Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18° C (–0.4° F) temperatures |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) |
| 17.5 m (57.4 ft) Mast - Bit Load - Single Pass | Up to 42 149 kg (Up to 92,922 lb) |
| 13.7 m (44.9 ft) Mast - Hoist Capacity | Up to 22 113 kg (Up to 48,750 lb) |
| Choice (1) | Fixed access ladder to the cab area |
| Compressor - Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| Compressor - Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) |
| Choice (2) | Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down |
| 13.7 m (44.9 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 13.7 m |
| Emissions (U.S. EPA Tier 4 Final): Engine | C32B @ 1,800 rpm |
| 17.5 m (57.4 ft) Mast - Hoist Capacity | Up to 22 113 kg (Up to 48,750 lb) |
| Features (2) | Pulldown/hoist system is a single cylinder |
| 13.7 m (44.9 ft) Mast - Bit Load - Single Pass | Up to 41 165 kg (Up to 90,753 lb) |
| Features (3) | Auto tensioning of pull down and hoist cables |
| Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396 | 751 kW |
| Features (4) | Feed system accommodates multiple pipe diameters |
| Emissions (Equivalent to Tier 2): Power Rating ISO 14396 | 769 kW |
| Frame and Work Deck — Components (1) | Stationary rear deck; for vertical and angle drilling |
| Drawbar Pull | 547000 N |
| Frame and Work Deck — Components (2) | Four leveling jacks to provide leveling on a 7° bench (any orientation) |
| Track chain guards and guides | Level two |
| Frame and Work Deck — Components (3) | Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option) |
| Travel Speed | 2.45 km/h |
| Frame and Work Deck — Components (4) | Heavy duty tow hooks (front end) |
| Lower rollers | Fourteen (14) |
| Components (5) | Hinged protective guard for full front drill window |
| Carrier Rollers | Three (3) |
| Components (6) | Guards for exhaust pipes and turbo lines |
| Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi) | 750 mm |
| Components (10) | In-deck mounted battery box |
| Components (9) | Self-closing, gates secure egress ladder locations |
| Hydraulics — Components (1) | Two (2) primary pumps – 210 cc (piston, with proportional electronic controls) |
| Components (12) | Air hose retention devices |
| Hydraulics — Components (2) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) |
| Hydraulics — Components (3) | Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls) |
| Feature | Approach angle of 14 degrees facilitates loading and unloading on a lowboy |
| Hydraulics — Components (4) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) |
| Components (7) | Mast access ladder with mast grating (option) |
| Hydraulics — Components (5) | Scheduled Oil Sampling (S∙O∙S) ports |
| Components (11) | Ground level keyed battery disconnect/starter lockout with remote jump start terminals |
| Components (8) | Three egress points on deck areas in addition to main access |
| Operating System Controls - Standard — Components (10) | Filter indicators for hydraulic, compressor and engine |
| Components (14) | ECM controlled proportional fan speed control system |
| Components (23) | Data logging of machine health with warnings, and fault code records; export capability |
| Components (20) | Cabin pressure manometer with indicator (option) |
| Operating System Controls - Standard — Components (3) | Rotation torque control |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) | 178-219 mm (7.0-8.625 in) |
| Operating System Controls - Standard — Components (12) | Dust suppression control |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) | 235 mm (9.25 in) |
| Components (17) | Tram interlock, mast up and locked or down and parked |
| Tool Package DTH — Components (1) | Two piece bushing |
| Operating System Controls - Standard — Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions |
| Tool Package DTH — Components (2) | Pipe positioner inserts |
| Tool Package DTH — Components (3) | Deck wrench, sliding |
| Components (22) | Prewired for Terrain and autonomous operation |
| Tool Package DTH — Components (4) | Shock sub and top sub adapter |
| Operating System Controls - Standard — Components (8) | Delayed engine shut down |
| Tool Package DTH — Components (5) | Cross over hammer adapter |
| Components (19) | Cab environment controls (AC, filter, heat, fan speeds) |
| Tool Package DTH — Components (6) | Pipe wiper seal |
| Operating System Controls - Standard — Components (7) | Drill performance and display system |
| Components (13) | Mast lock indicator |
| Operating System Controls - Standard — Components (6) | Drill depth meter |
| Operating System Controls - Standard — Components (2) | Electronic compressor control |
| Operating System Controls - Standard — Components (4) | Virtual rotary head travel stops and interlocks |
| Operating System Controls - Standard — Components (11) | Jack pressure sensors in the display |
| Operating System Controls - Standard — Components (5) | Pipe positioner engaged/disengaged indicator |
| Components (18) | Tram interlock, jacks retracted |
| Components (16) | Tram interlock, pipe in hole |
| Components (21) | Dust curtain lifting system – auto hydraulic raise front and rear (option) |
| Components (15) | Tram interlock, machine stability limits |
| Cab - Premium | – Leather seat with heat and ventilation– Dual pane window glass– Front window guard– Additional in-cab storage box– Additional windshield wipers on front and rear windows– Window shades (option)– Foldaway trainer’s seat (option)– Removable floor mat |
| Cab - Standard | – Fabric seat– Single pane window glass– Windshield wiper for driller window– Window shades (option)– Foldaway trainer’s seat (option)– Removable floor mat |
| Operating System Controls - Standard — Components (9) | Rotary head rpm gauge – (digital display in screen) |
| Dimensions (Approximate) - 13.7 m (44.9 ft) Mast — Length - Mast Down - Standard Cab | 21.1 m |
| Dimensions (Approximate) - 13.7 m (44.9 ft) Mast — Length - Mast Down - Extended Cab | 21.62 m |
| Dimensions (Approximate) - 13.7 m (44.9 ft) Mast — Height - Mast Up | 19.93 m |
| Lighting | – LED interior lights; separate reading light, and backlit joysticks and keypads– Zone controls for area lights and spot lighting for night drilling– Flood lights for the drill perimeter– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option) |
| Features (12) | Pipe catcher; manual or optional hydraulically actuated |
| Features (13) | Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only) |
| HVAC | – Floor vents in the foot rest area– Roof-mounted air conditioner/heating/pressurizing unit– Filter access from deck, does not require roof access, and has approximately 500 hour service interval– Defogging HVAC vents on driller window |
| Features (9) | Drill pipe positioner |
| Features (10) | Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option) |
| Features (6) | Sliding deck wrench assembly |
| Features (11) | Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb) |
| Features (15) | Mast access ladder and grating (option) |
| Features (5) | Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters |
| Receiver Tank Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE |
| Features (7) | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH |
| Receiver Tank Choice (2) | High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE |
| Features (14) | Mast lanyard mounting provisions (option) |
| Features (8) | Angle drilling 0-30°; in 5° increments |
| Engine Choices — Components (4) | Ether starting aid; ether bottle supplied locally |
| Engine Choices — Components (2) | Scheduled oil sampling (S∙O∙SSM) ports |
| Engine Choices — Components (1) | Dual starter motors |
| Engine Choices — Components (3) | Common air intake filters provide +500 hour service interval in normal operating conditions |
| Package (1) | Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water |
| Package (2) | Standard – Fast Fill for fuel and water; Automatic Lubrication System |
| Package (3) | Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose |
| Lifting Bails (Available on Request) | – 114 mm (4.5 in) API reg thread– 140 mm (5.5 in) API reg thread– 168 mm (6.625 in) for top sub/shock sub API thread– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread |
| Water injection and dry dust collector (option) | – Water tank capacity 1514 L (400 gal)– 204 m³/min (7,200 cfm) dry dust collector– Self-cleaning filters, with auto-eject dust chute |
| Water Injection - Standard | – Water tank capacity 1514 L (400 gal) |
| Choices (1) | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector) |
| Choices (3) | Static dust curtains, four sides boxed in (standard) |
| High Volume Water Injection System - Not Compatible with Basic Service Package | – Water tanks total capacity 3785 L (1,000 gal) maximum– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)– Secondary tank above deck – 2271 L (600 gal) capacity deck |
| Choices (2) | Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications) |
| Tool Package Rotary — Components (4) | Top Sub, or Shock sub and cross over adapter (option) |
| Tool Package Rotary — Components (3) | Deck wrench, sliding |
| Tool Package Rotary — Components (5) | Bit sub |
| Tool Package Rotary — Components (1) | Roller deck bushing |
| Tool Package Rotary — Components (6) | Pipe wiper seal |
| Tool Package Rotary — Components (2) | Pipe positioner inserts |
| Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) |
| Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| DTH Drilling - Includes Tool Lubrication and Hammer Storage | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) |
| Choice | Electronic compressor control and regulation with purged air lines |
| Frame and Work Deck — Components (5) | Four (4) lift lugs, for use with cables or chains |
| Frame and Work Deck — Components (7) | Bit storage box in-deck with hinged cover (option) |
| Frame and Work Deck — Components (6) | Walkway around cab to drill deck (option) |
| Frame and Work Deck — Features (2) | Slip resistant surface |
| Frame and Work Deck — Features (3) | Fuel tank capacity 1609 L (425 gal) |
| Frame and Work Deck — Features (6) | Three egress points on deck areas in addition to main access |
| Frame and Work Deck — Components (10) | Drill pipe thread greaser with remote fill tank or disposable grease bucket (option) |
| Frame and Work Deck — Features (7) | Sturdy guardrails, toe guards, self closing gates |
| Frame and Work Deck — Components (8) | DTH hammer storage on drill deck with high pressure configuration (option) |
| Frame and Work Deck — Features (4) | Fuel capacity expansion for additional +1609 L (425 gal) |
| Frame and Work Deck — Features (5) | Bolt-on platform for cold weather generator or fire suppression bottles (option) |
| Frame and Work Deck — Components (9) | Hydraulically operated viewing hatch in drill deck with spotlight (option) |
| Frame and Work Deck — Features (1) | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life |
| Cooling — Components (3) | Replaceable cooler core sections |
| Cooling — Components (4) | Automatic variable speed fan control |
| Automation and Technology — Components (6) | Wiring for third party interface |
| Rotary Head Top Drive System — Components (1) | Spindle with 168 mm (6.625 in) API regular thread and splined collar |
| Automation and Technology — Components (3) | Drill assist (single or multipass auto drill) (options) |
| Rotary Head Top Drive System — Components (2) | Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque |
| Automation and Technology — Components (5) | Optional Command for Drilling enables each operator to manage more than one machine |
| Rotary Head Top Drive System — Components (3) | Rotary torque control |
| Automation and Technology — Components (2) | Auto level, auto retract, auto mast |
| Automation and Technology — Components (1) | Drill depth indicator and interlocks |
| Optional Cat Terrain for Drills - Mining System Interface | – Production– Navigation |
| Automation and Technology — Components (4) | Product Link Elite (hardware from factory, subscription package via dealer) |
| Choice (3) | Cab perimeter walkway available with either choice |
| Cameras | – Mounted on the front and left sides to provide 360° view from operator's seat– Camera on the mast to view pipe carousel/top drive operation |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.~6337c3 | 203 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.~d7d8f9 | 178 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.~044f3a | 194 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.~0f0df5 | 219 mm |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.~b832ca | 235 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipe~998aea | 219 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipe~0a968c | 203 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipe~7a251c | 178 mm |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipe~fbd6ca | 194 mm |
| Drill Pipe — Note | Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6) | Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3) | Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1) | Rated down to –40° C (–40° F) temperatures |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5) | Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2) | Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4) | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank |
| Cable Diameter | 13 mm |
| Winch Reach - Past The Drill Deck | 6.1 m |
| Capacity Rating | 1814 kg |
| Overhead Winch System (optional) — Note | Variable speed control |
| Operator Environment — Components (7) | Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port |
| Operator Environment — Components (4) | Drill performance touchscreen display |
| Operator Environment — Components (3) | Cab perimeter walkway available for both cab sizes |
| Operator Environment — Components (1) | Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station |
| Operator Environment — Components (13) | Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) |
| Operator Environment — Components (9) | Power convertor 24V to 12V |
| Operator Environment — Components (2) | Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave |
| Operator Environment — Components (6) | Two swing-out hinged doors with windows and Cat keyed locks |
| Operator Environment — Components (14) | Trainer’s seat that folds away and has retractable seat belt (optional) |
| Operator Environment — Components (5) | Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise |
| Operator Environment — Components (10) | Radio-ready for communication and entertainment radio |
| Operator Environment — Components (11) | Cab roof access ladder (option) |
| Operator Environment — Components (8) | Additional display screen for cc cameras; color, high-definition 254 mm (10 in) |
| Operator Environment — Components (12) | Literature holder |
| Rotary Head Top Drive System — Components (4) | Virtual rotary head travel stops and interlocks |
| Mast Accessories Hydraulic (2) | One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket |
| Mast Accessories Hydraulic (1) | One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket |
| Mast Packages — Angle Drilling | Included with either mast |
| Mast Accessories Manual, 17.5 m (57.4 ft) Mast | Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket |
| Mast Accessories Manual, 13.7 m (44.9 ft) Mast | One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth~954d3c | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth~675897 | 194 mm (7.625 in), 219 mm (8.625 in) |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 3~eb2f89 | 235 mm |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 4~86b0d3 | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) |
| Carousel (Mast size and pipe diameter dependent) — Note | 13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters |
| Option | Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter |
| Working Weight Range - Minimum/Maximum | 75 800/97 000 kg (167,110/213,848 lb) |
| Weights - 17.5 m (57.4 ft) Mast — Working Weight Range - Minimum/Maximum | 75 500/97 500 kg (166,449/214,950 lb) |
منتجات مشابهة
معدات ثقيلة وآلياتCaterpillar
6060 Hydraulic Mining Shovel
اطلب عرض سعر
Caterpillar
903D Compact Wheel Loader
اطلب عرض سعر
Caterpillar
6040 Hydraulic Mining Shovel
اطلب عرض سعر
Caterpillar
910 Small Wheel Loader
اطلب عرض سعر
Caterpillar
6030 Hydraulic Shovel
اطلب عرض سعر
Caterpillar
903 Compact Wheel Loader
اطلب عرض سعر
Caterpillar
MD6200 Rotary Blasthole Drill Specifications
اطلب عرض سعر
Caterpillar
914 Small Wheel Loader
اطلب عرض سعر