Caterpillar

914 Small Wheel Loader

رقم القطعة: CAT-101780

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

914 Small Wheel Loader

المواصفات

Engine ModelCat C3.6
Bore98 mm
Stroke120 mm
Displacement3.6 l
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (4)*The measurements were conducted with the cab doors and windows closed.
NoteNet power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Fuel Tank165 l
Cooling System21.5 l
Engine Crankcase10 l
Transmission3.2 l
Model914
Product Pagehttps://www.cat.com/en_US/products/new/equipment/wheel-loaders/small-wheel-loaders/101780.html
Caterpillar CategorySmall Wheel Loaders
Caterpillar Category PathProducts > Equipment > Wheel Loaders > Small Wheel Loaders > 914
Caterpillar Product Familyequipment
Caterpillar Product Page ID101780
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20200212-8fc6b-7dfb1
FrontFixed; Locking differential (standard)
EmissionsEngine meets Tier 4 Final/Stage V emission standards.
Operating Weight8668 kg
Transmission — Note*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Recyclability95%
Hydraulic Tank55 l
Diesel Exhaust Fluid (DEF) Tank18 l
Hydraulic System - Including Tank98 l
Tires — Note (1)Other tire choices are available. Contact your Cat dealer for details.
Tires — Note (2)In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Rated Net Power - SAE J134974 kW
ROPSISO 3471:2008
FOPSISO 3449:2005
Service Refill Capacities — NoteDEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Bucket Capacities1.3-3.5 m3 (1.7-4.6 yd3)
Maximum Gross Power82 kW
Maximum Gross Power - Rated Engine Speed1800 r/min
Bucket Capacities - General Purpose1.3-1.9 m³ (1.7-2.5 yd³)
Maximum Gross Power - ISO 1439682 kW
Bucket Capacities - Light Material2.5-3.5 m³ (3.3-4.6 yd³)
Maximum Gross Power - ISO 14396 (metric)112 hp
Rated Net Power - Rated Engine Speed2200 r/min
Rated Net Power - ISO 924973 kW
Maximum Gross Torque - SAE J1995454 N·m
Maximum Gross Torque - ISO 14396450 N·m
Maximum Net Torque - SAE J1349446 N·m
Maximum Net Torque - ISO 9249443 N·m
Axles - Front Center Differential7.5 l
Axles - Rear Center Differential7.5 l
RearOscillating ±11 degrees; Locking differential (Standard)
Steering Articulation Angle - Each Direction40 °
Maximum Flow - Steering Pump82 L/min
Maximum Working Pressure - Steering Pump22500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.75 turns
Forward and Reverse - Speed Range 1*10 km/h
Forward and Reverse - Speed Range 3***40 km/h
Maximum Flow - Implement Pump148 L/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*90 L/min
Tires — Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Maximum Working Pressure - Implement Pump28000 kPa
Relief Pressure - Tilt Cylinder34000 kPa
Hydraulic Cycle Time - Rackback2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift5.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level3.7 s
Hydraulic Cycle Time - Total Cycle Time12.5 s
Standard Size17.5 R25 L2 XTLA
Other Choices Include17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Whee~79e9592.8 s
Hydraulic Cycle Time - Dump, at Maximum Reach1.4 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure21000 kPa
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure21000 kPa
Forward and Reverse - Speed Range 2*20 km/h
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard90 L/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High120 L/min

منتجات مشابهة

معدات ثقيلة وآليات