Caterpillar

986 Wheel Loader

رقم القطعة: CAT-123440

لا يعرض أي بائع سعرًا لهذا المنتج بعد.

للطلب والدفع استخدم تطبيق ENG.

الوصف

986 Wheel Loader

المواصفات

Engine ModelCat® C15
Gross Power - SAE J1995:2014340 kW
Net Power - SAE J1349:2011278 kW
Bore137 mm
Stroke171.5 mm
Displacement15.2 l
Note (1)Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Note (3)The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Forward - 17.3 km/h
Note (4)The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Forward - 212.2 km/h
Note (5)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons).
NoteAll dimensions are approximate.Specifications are calculated with a 6.1 m³ (8 yd³) rock bucket.
Reverse - 17.6 km/h
Fuel Tank535 l
Reverse - 213.6 km/h
Transmission75 l
BrakesISO 3450:2011
Model986
Product Pagehttps://www.cat.com/en_US/products/new/equipment/wheel-loaders/large-wheel-loaders/123440.html
Caterpillar CategoryLarge Wheel Loaders
Caterpillar Category PathProducts > Equipment > Wheel Loaders > Large Wheel Loaders > 986
Caterpillar Product Familyequipment
Caterpillar Product Page ID123440
Datasheet URLhttps://s7d2.scene7.com/is/content/Caterpillar/CM20250506-72e00-adc81
FrontFixed
Rated Speed2000
Engine Power - ISO 14396:2002335 kW
Wheel Base3810 mm
Torque Rise16%
ROPS/FOPSROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Diesel Exhaust Fluid Tank23 l
Crankcase34 l
Cooling Systems100 l
Raise9 s
Dump3.5 s
Lift/Tilt System - CircuitLoad Sense
Lift/Tilt System - Pump2 × 110 cc variable displacement
Transmission TypeCat planetary power shift
Lift Cylinder - Bore190 mm
Lift Cylinder - Stroke1138 mm
Tilt Cylinder - Bore170 mm
Tilt Cylinder - Stroke722 mm
Lower5.2 s
RearTrunnion
Operating Weight - High Lift47175 kg
Peak Power Speed1600
Rated Speed - 2,000 rpm - EEC 80/1269278 kW
Rated Speed - 2,000 rpm - ISO 9249278 kW
Bucket Capacity Range5.0-10.3 m³ (6.5-13.5 yd³)
Operating Weight - Standard44355 kg
Peak Torque (1,200 rpm) - SAE J1995:20142411 N·m
Rated Payload - Standard (Quarry Face)10 t
Cat Truck Match - High Lift772/773
Rated Payload - Loose Material (Standard)12.7 t
Rated Payload - High Lift (Quarry Face)10 t
Cat Truck Match - Standard770/735/740/745
Direct Drive - Forward 212.7 km/h
Rated Payload - Loose Material (High Lift)11 t
Direct Drive - Forward 322 km/h
Direct Drive - Forward 439 km/h
Direct Drive - Reverse 214.1 km/h
Direct Drive - Reverse 325 km/h
Direct Drive - Reverse 440.8 km/h
Relief Valve Setting - Lift/Tilt27900 kPa
Maximum Flow at 2,165 rpm470 L/min
Rack Back4.5 s
Lower Float Down4.3 s
Total Hydraulic Cycle Time21.3 s
Steering System - CircuitLoad Sense
Steering System - PumpPiston, variable displacement
Maximum Flow at 1,400 rpm200 L/min
Total Steering Angle70°
Steering Cut Off Pressure27600 kPa
Oscillation Angle±12.5°
Oscillation Angle - Chain Arrangement±8.5°
Hydraulic System Factory Fill330 l
Fuel Tank - Short Lift481 l
Operator Sound Pressure Level (ISO 6396:2008)72 dB(A)
Axle Oil - Differentials and Final Drives - Front186 l
Machine Sound Power Level (ISO 6395:2008)110 dB(A)
Axle Oil - Differentials and Final Drives - Rear170 l
Sound Performance - Tier 4 Final / Stage V — Note (1)* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Ground to Top of ROPS4100 mm
Hydraulic System - Tank Only130 l
Sound Performance - Tier 4 Final / Stage V — Note (2)** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Ground to Top of Exhaust Stacks4060 mm
Sound Performance - Tier 3 / Stage IIIA — Operator Sound Pressure Level (ISO 6396:2008)73 dB(A)
Ground to Top of Hood3270 mm
Sound Performance - Tier 3 / Stage IIIA — Note (1)* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Rear Axle - Centerline to Bumper3132 mm
Sound Performance - Tier 3 / Stage IIIA — Note (2)** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Ground to Center of Front Axle978 mm
Front Axle Centerline to Bucket Tip4201 mm
Ground to Fuel Tank Clearance691 mm
Maximum Overall Length11143 mm
Ground to Lower Hitch Clearance459 mm
Clearance at Maximum Lift3079 mm
Reach - Maximum Lift2175 mm
B-Pin Height - Maximum Lift4912 mm
Maximum Overall Height - Bucket Raised6817 mm
Dimensions (Approximate) - High Lift Linkage — Front Axle Centerline to Bucket Tip4649 mm
Dimensions (Approximate) - High Lift Linkage — Reach - Maximum Lift2248 mm
Dimensions (Approximate) - High Lift Linkage — Maximum Overall Length11591 mm
Dimensions (Approximate) - High Lift Linkage — Clearance at Maximum Lift3538 mm
Dimensions (Approximate) - High Lift Linkage — B-Pin Height - Maximum Lift5371 mm
Dimensions (Approximate) - High Lift Linkage — Maximum Overall Height - Bucket Raised7276 mm
Ground to Center of Rear Axle978 mm
Reach at Maximum Lift2437 mm
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket — Clearance at Maxim~42687d3259 mm
B-Pin Height at Maximum Lift4566 mm
Maximum Overall Height, Bucket Raised6359 mm
Rear Axle Center Line to Bumper3132 mm
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket — Maximum Overall Length10671 mm
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket — Front Axle Centerl~892b693729 mm
Dimensions (Approximate) - Quick Coupler and Fork — Maximum Overall Length10776 mm
Dimensions (Approximate) - Quick Coupler and Fork — Front Axle Centerline to Bucket Tip3834 mm

منتجات مشابهة

معدات ثقيلة وآليات